gx200 clone stock carb adjustment

[buckeye]

Sheared flywheel key.

 

[mmisterbungl]

Sheared flywheel key.

yeah might be. you'll have to pull the flywheel to check. it's happened to me a few times. is the pull start yanking out of your hand when you're trying to start it by chance?

check page 5 of this thread. starting on post #42

http://www.oldminibikes.com/forum/h...37922-some-installing-painting-tonight-5.html

 

[minibikeman1180]

its not sheared i just checked what else can it be ?

 

[mmisterbungl]

open your valve cover to make sure the rockers didn't come loose?

 

[minibikeman1180]

thanks for your link and ill check that now you are really helpfull waht is your youtube username ?

 

[buckeye]

That's about the only thing left.

 

[minibikeman1180]

thank you guys it was the intake valve but it still might have some carb problems

 

[mmisterbungl]

same as my uname here

 

[minibikeman1180]

i just found out what my carb problem

 

[buckeye]

And????

 

[minibikeman1180]

i was stupid enough to forget to drill out the jet i drilled it and it runs like a champ

 

[minibikeman1180]

my young mind is stupid sometimes but the motor is wayy fast

 

[buckeye]

All that?:laugh: Live and learn.

 

[minibikeman1180]

thanks

 

[boxorox]

so am i getting this right are you suposed to drill the jet on the clones as soon as you get them

 

[buckeye]

If you add a header and high flow air filter.