Holley 4 bbl carb on 6.5 clone.

[BBQJOE]

But, would it work? :biggrin:

 

[brown boonie]

It might look cool but you would drown your engine. It would never keep up with the fuel supply.

 

[WLB]

A carburetor works by creating a pressure difference which draws fuel out of the float bowl and through the jets. With such a small engine drawing through a much larger carburetor intake there might not be enough pressure difference to draw any fuel into the engine.

 

[Tom S.]

A carburetor works by creating a pressure difference which draws fuel out of the float bowl and through the jets. With such a small engine drawing through a much larger carburetor intake there might not be enough pressure difference to draw any fuel into the engine.

So you'd really want to add a supercharger. :laugh:

 

[Cuda54]

The 650 2 barrel would be better and still might drowned it out!

 

[Twid]

If you run a Holley on a clone you need a flowmaster.

 

[buckeye]

Where would you mount it?

 

[WLB]

On the supercharger which would be mounted on a 4 into 1 tunnel ram manifold:laugh::laugh::laugh:

 

[CarPlayLB]

Holley makes a 390 cfm double pumper that work perfectly out of the box. Couple that with a .290 lift cam and you are unbeatable!

 

[Darksiede]

They also make a 325cfm center carb for a 3x2 setup, mech secondaries.. honestly its the one i'd give the best chance to working- but even then that's way more carb then a predator would likely ever be able to use

 

[chipper]

There is a pharmacy at Walmart , please re-fill your meds :laugh:

 

[CarPlayLB]

They also make a 325cfm center carb for a 3x2 setup, mech secondaries.. honestly its the one i'd give the best chance to working- but even then that's way more carb then a predator would likely ever be able to use

He wants a 4 barrel carb....he already has the manifold...ACME racing has bad a$$ Holley to clone manifolds!