I'm not having much luck finding a clutch guard for my El tigre project, so I'm making one. This is just a prototype, so I'm using 22 ga steel. If it turns out ok, I'll use a heavier gauge for the final product. I took the measurements from a Golden Pinto clutch guard, mocked it up in cardboard, and will use my neighbor's sheet metal brake. I'll weld the rounded edge inside once it's formed. I'm sure this has been done by hundreds of mini bike guys, but I'll let you know how it goes.
Attachments
-
573.9 KB Views: 45
-
498 KB Views: 68