Boredom met a piece of aluminum this afternoon.
I have a lot more Lawn Boy engines than decks, so I stripped down a pair of Dura Force and made a plate to mount on the Mini Mate. I swapped to Z50 8" wheels, mostly for the brakes, but added height and contact patch will be handy. Being 6'2ish, bending the bars forward was needed if I was going to keep it. Carb/reed mounts on the bottom will be blocked off, new larger cages in the transfer area of the upper case, similar to WB location, so HL Tillies will both be nestled in the V, aiming straight up and with adjuster screws in easy reach.
I have a lot more Lawn Boy engines than decks, so I stripped down a pair of Dura Force and made a plate to mount on the Mini Mate. I swapped to Z50 8" wheels, mostly for the brakes, but added height and contact patch will be handy. Being 6'2ish, bending the bars forward was needed if I was going to keep it. Carb/reed mounts on the bottom will be blocked off, new larger cages in the transfer area of the upper case, similar to WB location, so HL Tillies will both be nestled in the V, aiming straight up and with adjuster screws in easy reach.