need some help please

[mtpcage]

I recently bought a Murray mini bike. With the 3.5. The rear sprocket is rusted. I would like to replace it with a normal #35 tooth sprocket. Were can i find them for a Murray. Thank you

 

[buckeye]

Welcome to OldMiniBikes.

Try OldMiniBikes Warehouse or put a parts wanted ad right here on this forum.
Fun little bikes.

 

[dakota]

Flat steel sprockets for #35 chain.

 

[CarPlayLB]

Why? Now you neeed a new clutch and chain. The stock set up is good!:thumbsup: Sand and repaint the sprocket!

 

[mtpcage]

i have several clutches and chains for a 35. ( all my racing go kart stuff). the motor that was on the bike is missing the carb(3.5). so i am going to mount a flat head or built clone.

what is the part number for the sporket looks like a lot, i dont know the size of the hub, ex. or do i need to drill it.

thanks

 

[dakota]

You need to measure it.