Here are the beginnings of my custom Doodle-Bug.
The frame, given to me by a good friend: GTO
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB1-1.jpg
The motor (Tecumseh OHH60) I’m going to use, bought as a display model from TSC.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB2-1.jpg
The TAV2, bought new from MFG Supply.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB3.jpg
The frame, with OHH60 sitting in place to verify it will fit. It looks like I will need to drill a couple holes in the mounting plate to accommodate this one.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB4-1.jpg
The OHH60 with TAV2 mounted.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB5-1.jpg
The OHH60 and TAV2 ready to install.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB6-1.jpg
I now need to strip the frame, sand and paint it, then I’ll be ready to assemble and detail the completed bike… stay tuned. :biggrin:
The frame, given to me by a good friend: GTO
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB1-1.jpg
The motor (Tecumseh OHH60) I’m going to use, bought as a display model from TSC.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB2-1.jpg
The TAV2, bought new from MFG Supply.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB3.jpg
The frame, with OHH60 sitting in place to verify it will fit. It looks like I will need to drill a couple holes in the mounting plate to accommodate this one.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB4-1.jpg
The OHH60 with TAV2 mounted.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB5-1.jpg
The OHH60 and TAV2 ready to install.
http://i19.photobucket.com/albums/b175/pb9x19/OldMiniBikes/OMB6-1.jpg
I now need to strip the frame, sand and paint it, then I’ll be ready to assemble and detail the completed bike… stay tuned. :biggrin: