I have been modifying a MonsterMoto MMB80. I installed the "big block" and added a torque converter which required some modification to the frame.
I love the little bike so much I decided to make some suspension.
It's just a simple springer design. I made all the pieces and next weekend, I'll have my buddy weld them to the forks. This should make the ride a little easier on the ol' kidneys.
The hoop shown in the last picture is a grab bar from a Z50 mini trail. It will be cut down and welded to the axle rockers to keep them aligned.

I love the little bike so much I decided to make some suspension.
It's just a simple springer design. I made all the pieces and next weekend, I'll have my buddy weld them to the forks. This should make the ride a little easier on the ol' kidneys.
The hoop shown in the last picture is a grab bar from a Z50 mini trail. It will be cut down and welded to the axle rockers to keep them aligned.




