I am looking for a flathead 8hp Briggs motor.
8hp with 1 inch shaft. Shaft must be at least 2 3/4 inches long. Or provide me a model number and type to see if I can find a shaft to swap in.
Cases should be smooth without studs sticking out, most I/C series engines will NOT fit in this application as there are external studs sticking out on the cases that get in the way of my clutch I want to use. It is best if there is no "collar" portion on the shaft, if you know what I mean. A picture of the style of engine I'm looking for is below.
Please make me an offer by Private Message.
This is going onto a Tote Gote 670 as the original Tecumseh 6hp is missing.
Not my engines, but what I'm looking for:
8hp with 1 inch shaft. Shaft must be at least 2 3/4 inches long. Or provide me a model number and type to see if I can find a shaft to swap in.
Cases should be smooth without studs sticking out, most I/C series engines will NOT fit in this application as there are external studs sticking out on the cases that get in the way of my clutch I want to use. It is best if there is no "collar" portion on the shaft, if you know what I mean. A picture of the style of engine I'm looking for is below.
Please make me an offer by Private Message.
This is going onto a Tote Gote 670 as the original Tecumseh 6hp is missing.
Not my engines, but what I'm looking for: