Looking for NOS Comet Series 30 1" bore driver for engine PTO shaft that uses the asymmetric drive belt and the matching Comet Series 30 3/4" bore 6" driven variable pitch pulley unit.
Must be made 10+ years ago by the original Comet Industries.
I realize the newly taken over Comet Industries and other clone companies are still making the units but, since the demise of the original Comet Industries (Hoffco), the new products are not as quality controlled as to tolerances, run out (concentric and axial) and things like riveted backing plates come apart when used on a higher revving 2 stroke engine.
If anyone knows of a reliable manufacturer, let me know.
Thanks,
Mike (760) 473-6201
cates0321@hotmail.com
Must be made 10+ years ago by the original Comet Industries.
I realize the newly taken over Comet Industries and other clone companies are still making the units but, since the demise of the original Comet Industries (Hoffco), the new products are not as quality controlled as to tolerances, run out (concentric and axial) and things like riveted backing plates come apart when used on a higher revving 2 stroke engine.
If anyone knows of a reliable manufacturer, let me know.
Thanks,
Mike (760) 473-6201
cates0321@hotmail.com