White smoke building up inside valve cover after new parts

[Jnunez4o88]

https://share.icloud.com/photos/079qWKEUG2vdFsfhSeCL4JP8w
I put in a billet rod
FIRE265 cam
Champion rocker arms
26lb springs
After putting in these parts smoke builds up inside valve cover when I rev

 

[sparkwizard]

Not sure why this happens, but I'll bet if it had a metal valve cover on it, the issue would be solved.

 

[SAS289]

Not sure why this happens, but I'll bet if it had a metal valve cover on it, the issue would be solved.

An easy test for that would be to start the engine with the rocker cover off. The smoke or no smoke question would be answered. And if there's still smoke it would be easier to see where it's coming from.

 

[Davis]

Do you have a catch can?

 

[sparkwizard]

It looks like there is a filter on a short hose, but I can't see if it is attached to anything.

 

[Jnunez4o88]

Not sure why this happens, but I'll bet if it had a metal valve cover on it, the issue would be solved.

The problem was my piston rings they were not good, I changed it out for a flat top piston with new rings and it’s running like a champ

 

[Jnunez4o88]

Do you have a catch can?

No, I don’t have a catch can the problem was that oil was getting past the piston rings because they were worn so I honed the cylinder and got a brand new flat top piston and rings and it fixed the problem

 

[sparkwizard]

Thank for letting us know how you fixed it.
Good job!
Have fun and be safe.