6.5

Anyone running a battery with at least 18AH on it? This is what is suppose to be used for electric start motors. Any pics or ideas would be great.

Hello i want to replace the carburetor on the 6.5 hp engine with a high performance carburetor but i dont know the intensification for the carburetor. Can anyone help me?

Bought a new one and finally put it on something, and it leaks 360 degrees around the seam of the tank! Nice quality control! I have to say it did start on the second pull though and does run well. What can I expect for 98.00 or less right? Anyone got a take off to sell? I have the black...

Can I just rub my head on hi grade sandpaper to flat for more compression and also what is the max lift that I can have when I DO THIS? Thanks

Hello everyone, I am new to the world of small engines and would like to know what I would need to get more power out of this Predator Hemi 6.5 hp engine. My motor is bone stock. What parts would I exactly need to gain some more horsepower? Part numbers would be greatly appreciated. Thanks

I dont see it offered on the web any more.

This was in the Tractor Supply flyer this weekend. I have my two DB 30's but I don't know much about these newer models. I see it comes stock with a 6.5 hp!! Not really crazy about the "look" of it though... although it does look to be well engineered.

I have a 6.5 HP engine and wheels and tires are 6 inch wheels with 4.10x3.50x6 tires. I figure I will have a lot of tork with the 6.5 engine. So I am trying to determine the amount of teeth for the clutch and rear sprocket. It seems for most applications the #35 chain is typically used...

Hi I'm Ricardo I'm new to the mini bike world.. I have a predator 6.5 with the govern removed moves fast but I'm having a bit of trouble I have a fast take off but down the line it don't pick up much speed....what can I do to get top end spee ...people told me to get smaller sprocket... Please...

First shot at this so feel free to chime in. Not sure how resto or mod to go but there's a lot of room on this mini for engine so we'll see. It's a 5HP Tec on it now but I have others including a 6.5 Predator, and I'm wondering how big of an engine will fit since I'm an adult (in size and age...

I put some aftermarket parts in to my 6.5 honda clone motor. Comment on what els you think i should do to the motor Exhaust Before:stock greyhound exhaust Now: aftermarket custom header Air filter Before: stock greyhound air filter Now...

Aftermaket air filter for my 6.5 hp honda clone

What kind of oil should i use for the 6.5 greyhound engine. Weight and brand please, Thanks.

Hey guys, i have a 6.5 clone and it will not fire up. It ran fine for about 5 minutes at idle but would not rev up(felt like choke was on but it wasnt). It died and when i went to start it again it puffed gas from the filter box. Now it kicks back extremly bad. Has spark and compression and oil...

Have a mod clone for a kart. It has billet rod, arc alum flywheel, flat top piston, 1.3:1 rockers, 265 lift cam, 14cc head, 26 lb springs, 10 deg timing key. Currently a stock carb and weenie pipe. What would be a good carb for this setup as well as pipe? Also anybody have a trick mix for fuel...

Hey everyone I have a motovox mbx10 and would like to swap out my 2.5 for the hf 6.5 but I don't have any welding tools my question is can I add this without cutting and welding the frame

Has any one hooked a 390 carb to a 6.5 and run the governor? It looks like the limit can be raised (billet rod & f/w) and still make good power?

1970 rupp roadster

1970 rupp roadster

First parts order to arrive. Let's see what we got.