6.5hp

engine model number is OH195EA I've tested the wires and this is what I have : green is engine kill, black is ground,red is hot, and yellow is hot. My question, I'm not going to run brake lights. Just a small headlight and tail light. Which of the hot wires do I Use? I believe the red has...

-Rebuilt 196cc motor from a baja warrior -Governor removed -Custom exhaust -Moroso Ultra 40 race wire -Brand new max torque 12T clutch 3/4" bore. -PMR billet motor mount adapter. -New Carlisle Turf Saver II tires 15x6.00-6NHS -Honda Fuel tank -Engine has a 12V coil under the flywheel that will...

I'm looking to buy a hf 6.5hp and was looking around to find the 20% coupon for the engine purchase and can't seem to find a coupon that is not expired. Hopefully someone can help me out here. Thanks a ton. :thumbsup:

NEW 6.5HP GAS ENGINE GO KART LOG SPLITTER MINI BIKE CARROLL STREAM MOTOR CO. | eBay Looks very similar, and yet different.. Your thoughts? Price is reasonable. :shrug:

hello guys sorry for the big question on my first post. but been lurking here and 4 cycle karting reading up all I can gather. I have access to alot of small engine parts and looking for a new power plant for my golf cart. i'm also a hobbiest fabricator so capable of doing quite a bit. money...

Had to take a slight pause from the minibike project that i started for my little nephew but now i am on track especially now that i scored on 2 almost new blue gx200 clones for at little less than the cost of my HF predator i recently bought but now returned :biggrin:. Originally i was suppose...

PARTING OUT 6.5HP CLONE MOTOR CULVER CITY CA 90230 REV RACING ROLLER ROCKERS 1.2 $150.00 OBO 14CC PORTED RACING HEAD MILLED .0060- -WITH STAINLESS STEEL BIG VALVES $250.00 OBO CHROME MOLLY PUSH RODS $20.00 OBO 22MM MIKUNI CARBURETOR $40.00 OBO Sold. AGK ALUMINUM INTAKE...

I need a recall oil starter assembly for a 6.5 generac pressure washer engine . it came off of a pressure washer obviously it's 196 cc and it's awesome I just cannot find a recoil starter for it anywhere . apparently the company was bought out by briggs and stratton power sports if you have 1...

Pulled this off from a minibike I had. It has very little use. Runs good. Includes header with exhaust. NO GAS TANK. The forward oil fill spout is damaged, possibly during shipping. Doesn't effect how it runs, but it does leak a little if the engine is tilted forward. Asking $75 shipped...

So like the title says I have a Briggs & Stratton 6.5HP on my bike and I was wondering if it would work with a gravity feed system. Basically I have a small beer keg that I fashioned with a gas tank inside. Now I want to run a tube to the small tank on the engine and would like to know if it...

Located in Cypress, Texas. Looking for $350.00 I have the hydraulic brake on the bike as well instead of the cable brake. I'll get some pictures up when I get home and can take a few. If you want some pictures and are interested, just PM me and I'll get them up ASAP. I also have the...

Where can you buy this online still? cannot find a valid link to purchase the motor!

Has anyone tried a 55 tooth sprocket on their doodlebug with a 6.5hp motor? How was the torque and top end affected? I am interested in the top speed and how much less sensitive the bike was to want to wheelie. Mine has a 70 tooth sprocket currently.

I got this 6.5HP mounting plate and I am not certain who made it. The plate is fine. A few of the bolts need to be replaced or tapped. I was able to remove it pretty easy. However, upon inspection I found a missing nut or two and a few bolts are not in perfect shape. I have no use for this...

I am looking to slightly reduce/delay the initial torque after putting in the 6.5hp HF motor. Would swapping the rear sprocket to a lower tooth count be sufficient? I am running a max-torque clutch. I weigh 170 lbs.

TANKSAREUS

TANKSAREUS

TANKSAREUS

TANKSAREUS

I am selling this GX200 clone on behalf of my father. He bought it a couple years ago for a rototiller and then discovered the tiller requires an engine with auxiliary reverse-rotation cam drive, so it's been sitting in the box unopened until I pulled it out to take these photos. I'm pretty sure...