I have a predator 212 and the carb leaks gas. i just recently got the engine and its had about an hour and a half of use. the leak appears to be coming from the plastic piece between the carb and the block. i think its called the carb insulator
not sure what is causing this problem any help...
I have a 5 horse Briggs that had a carb that drew out of a bottom mounted tank. The motor now will use an aux tank so I think it needs a new carb? I sure cant find one. Every search I tried came up empty. Model # is 135202. Any ideas?
Thanks-
I have a 212 predator I wanna install a 22mm carb and I can order everything tonight but I have a question. When I put the manifold on how will I get the carb studs out and what kind of bolts do I need to bolt the manifold onto the head. I'm not paying $30 for the manifold from nrracing so I'm...
I bought a batch of HS40 angled intakes the other day and found this larger bore carb bolted onto one of them. It matched the paint on the intake and its gummed up and gooey in the bowl so it appears they did run it......of course all I got was the intake and carb so it might not have been good...
Last summer i bought a Clinton model 414 engine. On it somebody had made a intake and mounted a Keihin carb on it. It is a slide valve side draft carb. The number stamped on the Keihin carb PE---45BATK. The letters PE are cast into the upper half of the carb and the number 45BATK is stamped on a...
Im looking for a HS35 Carb for a 1971 rupp scrambler. It would be great if it was black. I also need the small rod linkage to the governor rod. let me know what you have. Thanks
This is the intake that go kart USA sells for their little bad ass chopper. Fits Honda predator or clone engines to add a Mikuni slid carb.
Brand new. Never used. $55 shipped
so I'm helping a friend build up a nice little motor.
She has a 32mm intake with 28 ex. She wants to be able to ride around as well as be competitive when racing the guys. staying on pump gas as well.
Will have a black mamba cam 1.3 ratio rockers, billet rod and flywheel.
If anyone out...
Hi -
Been following/reading along for a bit, but this is my first post. Bought my daughter a Black Warrior that appears to have never been ridden. Takes some work to start, but does eventually and will idle. Dies when you give it gas. I changed oil, cleaned filter, tightened chain, lubricated...
I rebuilt the predator 212 that was smoking and had a little blow by, and it runs much much better, but there is always something that goes wrong. I bought a cheap carb off ebay and it ran too rich with the .37 jet so switch it out with a .35 now having a issue with the carb leaking down the...
That extruded aluminum series carb that the OH318 series came with is famously shoddy. I've got a decent sized shop, tig welder, and lots of metal odds ends pipes etc, so slapping a new carb on is no sweat. I ordered a replacement for a honda engine of similar displacement and am having a...
What is this gaping hole here on the left under the bowl on a new nos carburetor I got today? Shouldn't there be a Welsh plug covering this? Before I pop one in I just want to make sure the newer carbs didn't come with this open. Thanks
if this was for a 5hp I'd grabbed it up, don't mess with the small Briggs much.. Homelite Carburetor and Gas Tank Vintage Rototiller Lawn Mower Air Cleaner | eBay
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.