coleman

I'm new here and have been reading about fitting torque converters to Coleman 200 minibikes. Has anyone done this to a CT100? I assume it has the 5/8 engine shaft. Haven't seen the bike yet. Due for delivery today. Great site by the way. It's good to see a site without so much drama as some of...

I put this together about a month ago. Works well, especially off road in bumpy areas...Replaced original base with 3/4" plywood, bolted 2 valve springs to it with fender washers and lock nuts on the back side, bent a right angle in a 6" T hinge for the front and added a piece of 1/2" plywood...

Hi, new guy here looking to see if anyone has a complete list of 5.30 parts and numbers. I need to make an order but don't have part numbers!!! The man I am gonna order from wants part numbers. Any help would be just great! Thanks

Hi, I am in search of Coleman 2.40 and 5.30 parts. I need both bikes throttle cables, a 5.30 rear brake rod and kick starter. Gasket sets, oil seals and whatever you may have for them. Thanks!!!

Thought about making things for the Coleman ct200u and similar mini bikes. Is there anything out there people would be interested in? I've always been into manufacturing things for people's needs. What are some things people would like to see made?

Not mine https://pittsburgh.craigslist.org/mcy/6012536988.html

Continued from part one: Out of the box, the idle is way too fast. Or it may be something else. Starts up fine. When I unchoke it, it takes off. I squeeze the brake as hard as I can and it still move forward until I shut it off.

Hello all. Just purchased Coleman CT200 to ride in our central Virginia foothill "neighborhood". Looks like great fun. I already have a Honda recon and this will let my wife or kids explore our mountain with me. I have one problem, though. (See part 2)

Hello everyone! Got crazy and picked up 2 of these CT200's. They are both in pieces to be gone over and the frames painted. Only reason for that is they were very scratched up from shipping.

Good afternoon Anyone have a suggestion for turn signal/brake light for a coleman ct200. Thanks

Well, I finally finished this project today. Special thanks going out to FOMOGO, KEN and TRIPLE A! On to another custom DB30.....

I've been a member since 06 and obviously not a big time poster, I'll try to do better in the future. I'm retired, MC Mechanic, Small Engine Mechanic, and Water Meter Tech., also eight years in the USN. I was a mini bike kid in the 60's and have owned dozens over the years. My usual MO is to...

Well bought me one of these bikes at Walmart the other day on clearance for $250! Being the type of person that can't stand bone stock, I hope to dig into some mods for this cool mini bike. Also, seeing as I don't have any land to really ride it on, most of my driving will be in the...

not mine but looks almost new COLEMAN 1971 VINTAGE 2.4 SACHS MINI BIKE ENGINE MOTORCYCLE | eBay

Good afternoon I have a Coleman 2.40 all original , my recoil keeps braking and when I had it fixed last time bike ran for a couple of weeks then one day would not start or if it did ran for a few seconds . Have changed the plug have a spark, fresh gas just wont start I dont see anything...

I have a Coleman ct200u in RI and I want to know a few things 1) where can I ride this legally in the state. 2) is it worth trying to make it street legal if there is no where to ride legally? I do have a small field around the corner from my house I do ride on now but that gets old quick. I...

I've been playing with pulling my ice shanty with my CT200U. So I go to YouTube to see if anyone else is doing it. I did a search for CT200U in the last 30 days. I get back 178 videos. Holy crap! I'm thinking Coleman & Walmart sold a ton of these over the last Christmas season. The videos...

Well guys, it’s like this. Last year I attempted to build a Coleman Sport Bike and I didn’t quite finish in time. The more I looked at that bike the more I wished I had another one for my wife. Well as luck would have it I bought another one a couple of weeks ago. I wasn’t going to enter...

i bought my son a coleman ct200u for xmas and at the same time i ordered a torque converter from ebay well when i went to go and install the TC i found that the hisun engine on the coleman had a 5/8 crankshaft and the TC was a 3/4 shaft and then i found out that no one makes a TC for 5/8 shaft...