dyno

Looks like Dyno is shipping their own 212cc motor that will have a shaft taper to use a Clone flywheel. Racing Cams and Parts | Ducar 212cc OHV Engine | DUCAR-INTRO | DynoCams

My friends and I Are looking for some one in Florida to dyno our engines:scooter:

Hi Everyone, Got a little bit of an arms race going between my brothers and I in regards to our minibikes. I'm looking to add squeeze some more power out of my Hemi Predator (current set up listed below). Does anyone run a hemi predator with a Dyno 308 cam? Mikuni 22mm carb (130 main, 125...

Hi Everyone, Got a little bit of an arms race going between my brothers and I in regards to our minibikes. I'm looking to add squeeze some more power out of my Hemi Predator (current set up listed below). Does anyone run a hemi predator with a Dyno 308 cam? Mikuni 22mm carb (130 main...

Anyone here running a Dyno Cam in their Tecumseh HS40 or HS50 engine? I bought a Dyno brand 245 last year I was not 100% sure if it was correct for an HS40 or HS50 or what setup engine it was for, I believe it's a somewhat mild cam with about .050" more lift and possibly more duration. Thanks Tony

Hello everyone. We all know how to calculate top speed of our minis (if not, there are calculators online to help). As fun as that is, it isn't really useful unless you're on the salt flats... I am working on a project that (will hopefully) be able to calculate acceleration and top...

85$ shipped, compression release ground off This welded and ground cam provides .308" lift at the cam, which works out to .320" lift with the stock rockers. For open modified applications. The 308 is our most popular grind for modified clone class. This cam is easy on the valve...

Well today I went down to STOUT racing in Cleveland TN , first thing I want to say is Louis stout was as nice as can be and I enjoyed the time spend with him . Also the information learned today was invaluable . The motors I took there are a hemi predator with an RTC6 head extensive port work...

I was wanting to know some real dyno numbers with engines running black mamba cams. I'm needing to know how much I need my clutch to stall. I'd like to at least hear what rpm peak torque was at. I'm running a black mamba cam in a predator with a 18cc Honda head milled .050, SS valves, ported...

MTD trail flite 212cc dyno cam 18lbs springs .032 jet header air filter DB30R gc160 header

anyone have a spare Dyno 94-SS cam just laying around?

where do you get the black mamba sr cam nobody seems to have them in stock and whats about the dyno cam is it a good choice

Looking to see if anyone has a small engine dyno or knows of a shop with one. I'm in need of some dyno work. I'm in Hampton Roads, VA anywhere within a 2 hour ride would be great. With how big Langley Kart racing in I'm suprised one isnt easier to find. Thanks

looks to be an hs50, ohh55, ohh60 Dyno cam...Not a big lift cam but should be an improvement over stock... Tecumseh Dyno Cams Go Kart Racing | eBay

Has anyone ever advanced a dyno mod 2 cam in a 6.5 motor. Stock head on my predator so I'm thinking one dot ahead would give me more bottom end torque and having the head stock uncut should be ok ptv . If no one has info I'm just gona try it. Has 8* key on the motor trying stock key...

We finally got to make some pulls on our DynoJet chassis dyno (500 hp ATV, motorcycle, gokart version) and Mr Goat got to be the first vehicle on the dyno. This is an inertia dynomometer and with Mr Goats very low gearing each pull lasted under 2 seconds. When you opened the throttle from an...