fuel

I bought a few tanks this week :doah:. someone has some of these NOS tecumseh sidemounts on ebay right now, for the $$ I thought it was a great price so I picked one up. the threaded fill is just a soldered on piece to the extended fill tube. thinking (hoping) I can heat and slip the end...

OK guys, I have a weird one. At least for me. I had an Intek engine with an animal cam, WF piston/rod, pvl flywheel/ coil and a 26mm mikuni knockoff. The head is shaved .060 and I was using 90 octane fuel. No load it would hit 8k with no problems. I wanted a safer engine for high rpm so I got...

Not sure if its rupp or arco or either one.. lol kinda looks like rupp AND arco.. anyway,i dont need it anylonger so i'll offer it up on here before i show it to the Ebay wolves!!! Its thick and hard plastic with a rubberized spraycoat...50$ obo + shipping!

All right guys I kind of new to this but on my project, the gas tank sits level with the carb and the fuel line comes out of the bottom of the tank. so that mean the gas has to flow up to the cab. Will that work or does the tank have to be above the carb so the gas will flow down to it...

Lets see your small tanks I need one for the build off it dosent need to be pretty just small and in working condition THANKS

I don't know if some of the larger trail bikes with bigger tanks could make use of this or not. I will offer it for awhile and see before I cut it down. this is the cool non moving parts gas gauge fuel cap, 1 1/2" threads like the standard tec tanks use. It is the longer version though and...

I restored my brothers Bird minibike for his 50th birthday 4 years ago. I prepped the tank like the paint supplier told me to and it still pealed. I used single stage paint. It turned out perfect, but it pealed. I painted a Heald tank with a spray can an that has not pealed at all. I want to...

ebay item111240767926 thanks for looking

Tecumseh Fuel Tank 3 1/2- 5 HP good useable condition has some scratching and discoloration. With mounting bolts and fuel cap. $25.00 + shipping

had to repossess my son's mini bike from him (due to an unfortunate event with his attitude toward his mother)... I was abandoned at a young age and know how it is to be without good parents. his mother is GREAT! I dont play that shit! aside from that, he hadnt been working on it and I told...

Super nice tank, inside is in good shape with some rusting in some spots, should clean up easily. Outside chrome is in fantastic condition for its age I have NOT cleaned it with wax and 0000 steal wool it will look even better after that is done!! Top center of tank has a small speck on it and a...

I am tearing down the carb on the Bird Thunderbird I am working on:hammer:, and will need to replace the fuel fitting on the carb. The plastic piece is broken off and the metal tube is still attached:facepalm:. I don't think I should have any issues getting that out, but I was wondering if I had...

mikuni fuel pump $25.00 plus shipping out of CA .. money order preferred... might except paypal have to go through my buddie..... click on pics to make them bigger!!!!!!!

I'm trying to figure out what minibikes these caps were used on. I have 2. One is 6" overall length, the other is 7" overall length. They fit a standard 1-5/8 threaded metal neck but they are too long for any Arctic Cat tanks and have no vent screw. Generic black face with red indicator. Anyone...

I hope this doesn't sound like a stupid question, when I went to put gas into my Predator 212cc engine I noticed a orange thing in the fuel tank inside the fuel strainer that said fuel gauge??? How does that tell you how much fuel you got? Thanks! :confused:

I have a metal tank that may not be saved- has a bunch of pinholes I may be able to solder them but maybe a replacement is in order? any ideas? The engine is a 3.5 HP about 1968 vintage here is my NOVA http://i990.photobucket.com/albums/af28/newtvic/nova%20Re%20Launch/P1020451.jpg Here...

Looking for a steel fuel tank for a 67 vintage HS30. Should have a side fill from pictures I have seen. Also need the lower mounting bracket. Going in a 67 Roma Nova I am restoring. Thanks, Dennis

Hey guys im looking for more power mostly for drag race. im running a predator with a milled head .050 and a mod 2 cam, 18lb springs,.037 jet with intake and straight pipe. gov is removed so i have billet goodies. stock timing would 93 or 116 fuel make it faster i normally run 87 reg any tips...

I've searched but can't find any answers. I'm running a predator 212cc with a mod 2 cheater cam 18lb springs and I milled the head down .050 and running 140 emulsion and .039 jet bored out carb and air intake and straight exhust. What fuel do you think would be best???

Any ideas on how to mount a fuel tank up to a baja racer? Putting a clone on one for a customer. Thanks for any input