Hi all... looks like I have found project #2. It's a Baja Racer (DB30) that I'm going to put a 212cc Predator on. This is a DB30-S, right? Here are some photos:
Obviously, I have not worked with this frame or engine before, so any advice you all have will be HUGELY helpful. Here goes...
Hello guys, I've been a member here for a while but I don't visit the site often. I found this one at a swap meet, it has a Cooper Klipper engine. I think that's from a reel type mower or tiller.
What is the bike?
Thanks
I finally have the pictures in the normal position.
I have an old Arco minibike that was originally a lime green color. Does anybody have a paint code for the original color, or a standard car color that matches?
Dave
1972 Speedway Green Horn Sports Cycle / Mini Bike
This is a classic mini bike from the early 70’s that was built in Mansfield, Ohio across town from Rupp Industries. In fact Speedway Products, Inc., was started by 2 ex-Rupp employees.
The Green Horn was only produced in ’72 & this bike is...
I recently pick up a Green Horn Muffler. Is there supposed to be a bracket holding the muffler under the seat? Muffler screwed on motor only seems OK as is but is that how its was designed to be installed?
When I was removing the spray paint from my minibike I found decals on the frame and fenders but Im not sure what color.. anyway Im trying to buy new decals but I cant find any. Orange and black would be awesome but I might paint the bike again to match the decals. The bike was green from the...
Made my 1st "minibike project" purchase last night and hope I did ok. I am not doing a "correct" restoration as I believe that the bike is missing too many original parts. I am just looking to make a nice rider. I believe it to be a 1971 Rupp Scrambler. It has the original green paint under...
I have front brake rotor painted green on one side. I believe I have the original screws to mount.
One foot peg
Jack shaft with sprockets.
Front and rear axles with spacers and adjusters.
2 front tube caps. Green over spary but will come off and aren't damaged.
$35 shipped for...
This an Speedway Green Horn parts bike I got on a trade. Just about everything is there to make a complete roller. It's a great bike for a rider or go all the way & restore it. I will include a photo copy of the parts manual (not shown in picture) & will include a set of gas tank decals...
Maybe its just me because I planned on some kind of green powder coat for my bike (I dont have a green bike yet) that makes me notice the abundance of other very cool green bikes in this years build off! Kinda like wanting pizza for lunch and all the commercials and adds you see are for pizza...
Sometimes the "I know a guy who likes mini bikes friend of a friend" call pans out. Last year I found a disassembled Sears Drover spread out inside a barn and I mean spread out. Three story barn full of mostly car parts and three nice collectable cars you would never guess were there, and...
I know they look like regular sized motorcycles and they have everything a motorcycle has, just scaled down 50%
The green one was running when parked 2 years ago. The blue one is for parts but it's 99% complete.
Steve 719-487-8297 Sorry about the photo mix up. $375 for both. Must be sold...
I picked these 2 baja's up yesterday.
The black one has everything except the motor, and the green one is ready to roll.
I have not been able to crank the green one, though.
I was told the carburetor just needs to be cleaned. How do I go about doing that?
I pulled the carb cover off and...
Going to pick these minis up this weekend. I'm pretty sure the green one is an early bronco not sure on the red one. I think the motor says 64'
Not sure what kind of motor is on the green one.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.