hard

Need adapter that gives you threads for mufflers on HS50. Would take 2 if u had them. I think the part is 730165 but hard to tell from drawing if there are threads. Cant see what else that part would be for...

I have a old mtd trail flite minibike yellow 5h/p model with lights why is it so hard to find parts is this a rare minibike I had this model when I was a kid came across a rollig frame a while back and decided to restore . did realize it would be so hard to find parts. is this a rare item mike

Really complete,looks like all the hard to find parts are there and she's a runner. https://akroncanton.craigslist.org/mcy/4943037890.html

I noticed yesterday that my cable on the start is jerky and I have to pull it insanely hard And quick to get it running, if I don't pull it hard or quickly enough it is jerky and it get locked, kind of like a seatbelt. Does anyone know why this is the problem?

I just got this frame from my cousin. The only thing i can use to identify it is a number etched into the handlebars, on the plate where it attaches to the frame. The number is B3868-39. Couldn't find anything on Google. It looks most like a Bonanza, but so many manufacturers at the time made...

Turbonique Micro Turbo Engine Drag Race Vintage Nostalgia Motorcycle Go Cart | eBay Hard to believe that little thing made that kind of HP and torque...hard to believe what it cost back on the 60's too!!

Looks like an Arco put it came on my powerdyne rail chopper. Really good shape. Bb size hole in reflector. Small melt mark on bottom side by whit strap. No cracks or splits. Molded vinyl. Metal pan no rust. The don't make seats like this any more. Hard to find them in this condition. Would look...

Here is a speedway roller forsale.I wasnt going to sell but I have 3 bikes and 2 trikes to do before this. It is original paint, nice tank,Speedway tires,Also comes with fenders 1 NOS rear and the hard to find clutch cover and bracket. $350 no shipping but could help with delivery . Located...

need the right hand control for this bike. it got smashed a long time ago. Also need a Throttle cable, but those are a lot easier to find online. Anyone know where I could find one. or at least something similar? These 1/2 inch handlebars are hard to shop for.

Hello all, I have a basic old school type frame with a Predator 212 engine on it. The problem is when you advance the throttle (and not hard either) it will literally launch out from under you if you're not sitting forward on the seat. It's just way too dangerous for the kids. Any suggestions...

I'm making my first mods on a 212 and noticed that it's very hard to turn right now with the side cover off and the cam out. I even hear somewhat of a scratching sounds as the piston reaches TDC and then once it turns over it frees up a bit. Plug has been out but I don't think there is anyway...

Ok we'll I put my new cam in it's a 308 dyno I already clearanced the block for the lobes, here is my problem when I put the cam in and threw the side cover on and tried to turn it over by hand it was like stiff to turn it over, but when I turn it over with out the cam in it's easy can soneone...

This past weekend my father passed away.I haven't seen or talked to the man in 24 years,we had a major blow out when I was 18 and I left and never looked back.He was a very overbearing man and I was,well,I was 18 and quite the A**hole in my own right.Both of us were also as stubborn as you could...

Okay, so i bought a gc160 for $100 runs great and fits my db30 perfect but is hard to pull. I changed oil, plug and it pulls normal until it hits a certain point (obviously at the top of the compression stroke) and if you dont time it right and pull with this in the middle of your pull it will...

I know some people gotta be looking for this if you own a Taco. Mini Bike Brake Arm and Clevis Fits Taco Minibikes | eBay

Ok, Ive messed around with adjustments and Im stumped. My HS40 is a PITA to start when cold. I have to pull until Im going to pass out. Once its warm its a one pull engine. What am I doing wrong with the adjustments. Please help me!!!!!

I have a set of really HARD tires. The tires are in great shape, just hard. Does any one have any proven tips to reconditioned the rubber and make it softer and more plyable? Thanks, Tim

Ok so I finally got my replacement rocker stud in that I broke, I set the motor @ TDC installed the 18lb springs and set the lash at .002 intake and .003 exhaust which I will admit is the smallest valve lash I've ever seen. I got it all put back together and now the motor is EXTREMELY hard to...

Hi guys, as you can see I am new here but I have done a lot reading and learning from you guys. I really need someone's help with this new predator 212 project that I have been working on. I have put this motor in my sons snowmobile and it is extremely hard starting. So much that I almost broke...

I've been working on a hs40 on my thunderbird and it will not start good. I can't get it to start but spray starter fluid through the carb a pull or two later and she's good to go. Whats the problem? Also when i idle it for a while then hit the gas she blows a little white smoke.