heat

I've done a ton of searching but haven't had any luck finding intelligible instructions on removing the governor on my Heat. The Heat engine is not like the Honda Clones...the governor appears to work externally to the engine. Has anybody done a write-up on this?

hey mini nuts, I have stock front fender,rear fender,handlebar,stock carb,fake fuel tank,and other parts all in good shape if anyone is interested please let me know,happy motoring THANKS bud

Hey all, FS: A G&G mfg "A" type sprocket 36 tooth for #41/420 chain (same as on the Heat). Cheap mod to get your Baja from stock 20mph to around 30mph without loosing much low-end. This is for the rear tire and center hole matches bearing hub with included indexing spacer. Line up and drill...

I am looking for Baja Heat frame and front end. I would need the Frame to be in decent shape and the forks to be straight. If you don't have forks but a nice frame that's fine as well. Please contact me through the forums via pm or at dsinks@att.net. Send your price along with pm...

See link for details please:http://www.oldminibikes.com/forum/baja-motorsports-doodlebug-minibikes/17545-wanted-baja-warrior-carbon-heat-bolt-jack-shaft.html#post115003

I know a lot of you have replaced the bolt on jack shaft unit on your baja heat, warrior or carbon with a tav2 unit. I would like to buy the parts you replaced: (mounting plate, sprockets, chain, clutch cover, clutch is optional) Basically I want all the all the parts you took off when you...

Hey all, I am looking for a simple and inexpensive way to get a liitle more mph from my Baja heat. I don't want to mess with the gov and have to do the billet/jet/valve thing. It has great take off, but the gov brings it down on wot. Calculated at 20 mph with my nav and a car riding beside...

Hey all, I have the opportunity to get either a new Baja Heat w/6.5 clone For $300 from Dick's (display clearance-last one left) OR a new Baja Duddlebug w/Lifan 2.8 at PepBoys for $250. I'm partial to the old style looking mini's, but really dig the "Harley Sportster" looking...

Well as some of you know, my friend crashed my MB-165 minibaja and i have been looking online for some replacement bikes.. Though my dream is to have a super bronc, i have been looking at the Baja Heat (which is basically a clone of the mini baja) one thing i wanted to know is will the TAV that...

Has anybody tried to switch the counter shaft sprokets on the Baja Heat to try for more top end speed? I like the Torque-A-Verter idea but I am reluctant to spend the money. Thanks Harry

Hey I just bought a Baja Heat for 200$ and was wondering if the mods from agk for the gx160/200 will work on this 6.5hp engine? Thanks.