lifan

Hello Community, I have been researching the PhatMoto Rover and All Terrain motorized bicycles. These motorized bicycles have engine and drive trains similar to mini bikes. I. e. a bolt-on 4 cycle engine and a centrifugal clutch. The community of PhatMoto people is growing fast. I believe...

I was looking at the HF Predator 13hp engine and I found that Home Depot had the Lifan for a cheaper price and what seems like a better warranty. The Lifan not only has the manual and electric start, but also the 3 amp charging system, whereas the Predator doesn't. Anyone try one of the 13...

Looking for a 125cc lifan with clutch Or who's got the best deal on them

My honda clone is making a quite loud whining/squeling noise whenever I put any load on it, but disappears at certain points during throttle input. The engine is used to power a homebuilt mini-bike with 22"x10" ATV wheels, the power is transferred through a 2:1 reduction wet clutch -> 11 ->...

And I found out its a really tight fit. I had to take the muffler protector off, and air filter cover off. The gas tank cap/knob is centered, so you can't use it with the tank on. I will take the one off the original baja motor and use that if it fits the lifan. The metal tanks hang a lot...

Looking around it seems there is some differences in these 2 brands??? I found this surfing and seems to be a good price. Too bad no electric start. I am looking to repower an old 1967 SS12 Sears Tractor. The old Tecumseh engine had electronic ignition and the module has failed. LIFAN 1 in...

Looking around it seems there is some differences in these 2 brands??? I found this surfing and seems to be a good price. Too bad no electric start. I am looking to repower an old 1967 SS12 Sears Tractor. The old Tecumseh engine had electronic ignition and the module has failed. LIFAN 1 in...

Does anyone know if the Model 1P52FMI-H Lifan electric start, 125cc engine is available in the U.S.? I have found that the same engine, but without electric starting, is available in the U.S.

Hello: Just registered today. Working on 2 Baja Warriors that I bought disassembled in boxes. I ordered a Lifan electric start (LF168F-2BDQ) 5.6 from the Home Depot. So far so good. Started up and I changed the exhaust and air cleaner. Jackshaft set up and likage were easy as well...

Hi OldMiniBikes, It's been a long time since I've been on. Sadly I had to sell my Baja Racer (divorce.) But, I picked up a new engine the other day at the local Lumberjack so eventually I'll do another bike. Lumberjack had a clearance on their small engines so I got a Lifan LF160 4HP dirt cheap....83...

Trying to finish up my turbo Lifan project. Does anyone have any tips on getting 12v from the stock flywheel to power the oil pump? I read I need a genuine GX160 Honda flywheel to accomplish this. Is this true? Any tips would be great!

Hello all: I have a Lifan 212cc "www.brandnewengines.com/LF170F-BDQ.aspx" I am planning to UPGRADE the cam to the following: MOD2-Grind-Predator-Core-Dyno-Cams from OldMiniBikes???? my question is , Is this CAM compatible with this engine??????? are the normal gasket kits like ...

Just picked up a honda 50. Who has the best deal on the 125cc honda replacement engines?

Hey, don't know if y'all deal with Honda Z50s at this website, but I have a '78 Z50 ('79 model, the frame says, since the bike came off the line in 9/78) with what seems to be a 72cc Lifan motor dropped onto the frame, and I'm trying to square away the cluster that consists of cables, casings...

Search engine locks up when I try to do a topic search. I see that the Lifan company offers engines to upgrade the Honda Trail 70 ( CT70). Has anyone here done this and which engine would you recommend? I bought the bike with a damaged gear box for almost nothing and was thinking it might be...

Took carb apart, nothing there. Checked for spark, good. It's got gas in it and it's getting to the carb. I did run it in the rain a bit the other day, could I have clogged the valves doing that? I'm at a loss here. If the valves are clogged, can they be cleared easily? Need help, it's on a...

I cant find these, so maybe some can help. What is the bolting measurements for the Lifan 4 hp LF160? Also, what is the measurement from the engine bottom to the center of the shaft?

Hey guys I'm in need of a recoil starter for a 196cc Lifan , The Blue clone . The predator recoil will not work as the starter cup seems to be deeper . Please let me know if you have one to part with ?

Hi, I have a NR Racing Stage 1 modified lifan 6.5hp clone. It currently has: 18lb valve springs rejetted oem carb honda oem flywheel (not aluminum) aftermarket air filter no governor I'm looking to get more torque, and the ability to safely rev it higher. I've looked over the...

Have about 100 miles on a Lifan (Z-Star) engine in a 73 SL-70. While out on a road trip was down shifting, coming to a stop. Bike went into neutral and will not shift out, up nor down. Big Rob and I switched the engine out today, thankfully I have lots of good help, but has anyone experienced...