model

Good morning all , haven't been on much but have been working on a couple bikes . The super Powell has had the frame cut up a bit , I took the Powell down tubes off and the foot rest . I went back with a single down tube , shaved off 13 lbs in doing so and made the bike narrower . Also put a...

Hello,I am a Administrator for Lil Indian. I have decided to sell my Rare,all original parts 1966 Lil Indian model 500.This bike is documented,all original parts,tires,wheels,seat etc.....The engine also has it's original paint and decals and has been gone through,completely...

Have had this for awhile. Never have known exactly what year or model it is. Almost every speedway I've seen has a slanted motor mount plate welded on, but this one doesn't. Anyone know why? Could you give anymore info about the bike? Not sure if it's correct clutch cover. Has never been...

Hi Guys , I have a Vintage B&S 3 hp model 80202 with two oil caps and two drain screws. My first question is i only put oil in one side , and fill it until i saw a little oil coming up before it reached the treads of the oil cap was that correct . My second question is a after running it for...

I have an hs40 engine I'm gathering parts for to rebuild for a member here and his crank is shot, The shroud on this engine may not be the correct one and the part number that comes up for this model is NLA, his is the extended shaft for a TC but he told me a shorter crank will work for his...

Can some tell me how to read the info on Manco thunderbird. I would like to know what year mine was built. Thanks.

does anyone know what year and model this is? I think its lil indian.

Just curious what people think about Manco mini bikes. I know nothing about them but I have the opportunity to pick one up fairly reasonably. Anyone familiar with the 593-01 model?

Hi guys , i'm trying to put a band brake on a Briggs model 80202 engine but it's doesn't have the pto holes to mount it. I'm looking at a new side plate cover on E-bay it's from a 3 hp Briggs model 80202 but it's from a gear reduction engine will it work and how hard will it be to install it...

My father has an old Artic Prowler, model 2325-001, Thief River Falls, Minn., Fichel & Sachs Ag engine, that he has asked me to research and attempt to sell. Any help along these lines would be greatly appreciated.

My father has an old Artic Prowler, model 2325-001, Thief River Falls, Minn., Fichel & Sachs Ag engine, that he has asked me to research and attempt to sell. Any help along these lines would be greatly appreciated.

I just picked up this "Rupp" at least the seat says so. Don't know the model. Missing a front end. No rear sprocket etc. I think the front end will be my primary focus first. Tank is nice and clean inside. Any info is appreciated. On another note, I was having problems uploading images...

I have several dealer brochures 71, 73 Camaro. (covers RS/SS/Z28) 68,71,72,75 Corvette brochures. 81 Malibu. 86 Chevy light duty truck repair manual. Book: "How to super tune your Z28" covers 70-81 cars. 5.00+2.50 shipping. 81 Camaro Z28 ERTL model. (Metal body, un assembled ) 20.00 +...

Up for sale is a Rare used Lil Indian Original 13 Tooth Driven Clutch that go's on the jack shaft Teeth are in excellent not worn condition.This is a Fairbanks Morse Clutch and is next to impossible to find! Missing the 2 springs that hold the shoes in place.They were misplaced and at this point...

$80 left my wallet for this beauty....looks to be all there and unmolested, including kickstand, springer forks and the foot pegs are still there :thumbsup: Also, it looks to have never had fenders installed.. Cant figure out what model it is...

Hey, does anyone have a fork that would fit and ARCO model 430 bike?

I just pulled my Gote out of storage after a few years. I bought it long ago and the title has been lost so I don't have any info any more. Can anyone ID this gote for me. I have a Youtube vid that will show you every angle' https://www.youtube.com/watch?v=4YIM_khldsY Thanks for the help...

Hi all. My first post here although I have been lurking here for years. This site was invaluable for helping me keep my old Rupp going. So it was time to move on, and I bought this Powell H model from a fine gentleman in California. It's serial number is 6057-H. So in my spare time...

Does anyone know what year and model this cat bike is? Thanks in advance

Completed this last night. Here are some pictures. (actual bike is a darker blue...don't know why it came out lighter in the pictures). Thanks to everybody who gave me lots of information on this bike. A HUGE thanks to Kenny for making the seat from a picture in the brochure and some...