ohv

I bought an OHV Briggs today. It was sitting for a couple years after it was removed from a tiller. The seller claimed it ran perfect. I took the carb off to clean it before I tried starting it and noticed it had a plastic adapter/restrictor between the carb and engine. The carb clearly has a...

I have a 5.5 horse tec ohv engine and I was wondering if there are any performance parts i could use on it. It take the same coil as a predator engine, and the same stock gas tank so i was wondering if it takes the same parts as the predator engines. Thank you in advance

I'm curious about what people on OldMiniBikes think about this comparison,Tec 5.5 Power Sport OHV vs. A vintage Tec 4or5 hp flathead. The chosen motor will be going on a Manco Trailcat.

I picked up these parts from ex kart guy. I can't remember what he said 6.5 Briggs or Clone, I know nothing about these parts. He did say carb had work on it & it was illegal For race... And ran great with it. These parts need a home, I'm hoping someone can use them. I can send more pics...

Yes I know I can buy one new but the Chinese ones are junk and oem is so dam expensive. Does anyone have one laying around I can get on da cheap. Lol 5,5.5and 6hp are all the same I believe.

In the last updates of Parts listings for Tecumseh engines, Tecumseh was substituting the 33158 fixed compression release cam with the 37040 mechanical compression release version that was made for the OHV engine. Has anyone installed one into a rebuild if and has their been any issue with it...

Hey all!! I have a Tecumseh OHH60 motor and want to do a few simple mods/upgrades. The carb on the motor now is stock, I found a high performance carb on ebay (New High Power Racing Carburetor Tecumseh 640346 640305 Fit OHH50 55 60 65 | eBay) but the carb does not have a primer bulb, but does...

Looking for any comments or experience re-carbing with this motor. I have been working on a MW Trike on another post: http://www.oldminibikes.com/forum/vintage-trikes/119588-montgomery-wards-zcq-13995b-cestad.html But, I thought I'd post a couple of pics of what's going in the trike...

Looking to see if someone could use this as a start for an Animal build. The #'s are: YBSXS.2051HF 274479 if that helps. The rod is snapped and it's missing the stock carb and it has a 3/4 keyed and tapped shaft. Lets say $25.00 plus shipping from N.Y. 13032. Thanks, Owen

1970 CAT 350 SS rebuild with 6hp Tecumseh Powersport engine. Air Brush Flames, torque tube header

1970 CAT 350 SS rebuild with 6hp Tecumseh Powersport engine. Air Brush Flames, torque tube header

1970 CAT 350 SS rebuild with 6hp Tecumseh Powersport engine. Air Brush Flames, torque tube header

1970 CAT 350 SS rebuild with 6hp Tecumseh Powersport engine. Air Brush Flames, torque tube header

1970 CAT 350 SS rebuild with 6hp Tecumseh Powersport engine. Air Brush Flames, torque tube header

I have a little OHV 5HP Power Sport engine with the governor still attached. I was thinking of removing it. Does anyone make a billet flywheel for these motors, or know where or which model I would need? Thanks!

Looking for pull start and maybe some other items for OHV 5.5 Tech. Perfer cheap as this is a basket case gokart project that might not work out. Have Paypal. Thanks Doug. 914-494-1288 if you like to text.

I am looking for a stock exhaust and air cleaner housing for a Honda 9 hp. They're needed to replace the ones on a pressure washer that got got damaged while unloading it. Please let me know what you have and thanks! Owen

For sale, OHV Briggs 6 Horse. Gas tank removed, came off a pressure washer... Ran once, never touched after that. DM me for more info. Located in Erie, PA. Cross posted on craigslist. Message me for better pictures.

If anyone has the length of the Tecumseh OHV pushrods (5.5hp to be exact) on hand, I'd appreciate it.

So I picked up a Tecumseh Motor Sport OHV engine (silver) and was told it was a 4 HP but i'm thinking with the Model HH60 everything I see point to a 6hp. Right?