pic

Chromed Front Forks for Baja Warrior

Dunecycle

Dunecycle

Dunecycle rebuild

Dunecycle rebuild

beekeeper got the Bonanza he always wanted thanks to jeep4me!! The sprocket was worn down to the nub. He bought a flat 60t off OldMiniBikes ... Both the old and new sprockets went on the CNC Wayne the CNC guy named the program .. Made a jig to hold it while I stitched the back I only MIG...

Soak for a couple days with PB Blaster or what ever ... Get a few 5/8 x 1" or so dowels ... put them in the grip end and pound! :thumbsup:

I have a Tecumseh H60 .. the filler tube where is goes in the side cover is loose, doesn't seem to make a good seal. I haven't ran the engine yet so I don't know if it leaks. What can be done to seal it in there?

Here is a cool shot of George Barris, flanked by a couple of exceedingly creepy looking fellas, unveiling his line of custom bikes that I saw in a 1970 trade rag.

I have 2 identical Hilltoppers, I put new Chinese 30 series Tavs on both. They are street legal and get rode on the street at full speed, 35/40 mph. Mine was fine ... my wifes had some vibration. it was recomended that I get the comet TAV spray lube. After applying it the vibration...

Can somebody post a pic for me Still a newbie when it comes To downloading a pic Thx Frank

Studz Hardware Studz Powersports & Hardware is located in Dearborn Heights, MI. Shop our large online inventory. was selling this Kit for $50, I bought 2, it was $116 delivered. It came with the handlebar controller, light bar and a flasher relay. The light bar has a tape backing to stick it...

Hello I'm looking to see if anyone has a good image of the cheeftah 1300 front fork badge to have it recreated. Looking for one like this. Thanks.

Anyone own a rupp with a rear disk brake with foot pedal. i need a detailed pic of the lever and mount as well as the caliper. i bought a nos rod and caliper but im going to have to make the lever. my bike was missing all brake parts. thanks in advance for anyones help.

I've been lurking long enough and just thought I'd say hello. Picked up an old el tigre frame; am putting on the 5hp Tecumseh from my Toro snow blower. There is chrome under 2+ layers of paint, but after a bit of work removing the paint, it seems the old chrome is too pitted and dull to...

Bought this recently, its a 1975 Kawasaki KV75 one owner adult owned campground bike complete minus a rubber foot peg cover and a broken throttle cable, should run with easy , so far I cleaned tank,cleaned carb got spark next fix the throttle cable and I think it should run........ Curious...

That is one SCHWEET Black Widow!

What mini is that kid riding? Any guess what year that might have been taken? I've seen that many times and its hands down my favorite mini bike pic!!

Can anyone tell me what model number this Comet assembly is? And if any one has a blow-up of it? Please advise I'm wondering if there is a spring and washer in these like the Rupp torque set-ups. And wanting to see if anything could be sticking in that housing.

I know the duster chopper came with a different gas tank and Im pretty sure exhaust on the purple chopper. This is the only pic I could find with this gas tank and muffler. I already have the gas tank I just need to find a similar muffler. Any help would be awesome.