plate

The Thunderbird is for sale and I will be bringing it to Windber. You can see the complete build under project logs. Fully stripped, primed and re-painted, new bolts as necessary, ARCO chain guard, new Max Torque clutch. Honda GC160 with welded custom exhaust, hi-flow air filter, new carb and...

wondering if a clone (predator 212) is affected by the engine plate angle as far as carburetor functions go. Has anyone ever had any problem with their carbs not getting any fuel with a slanted engine plate such as a bird nighthawk

Im looking for a tecumseh non lighting coil point type breaker plate assembly like this ----> prefer complete but can work with parts as well. thanks.

Bidding is pretty heavy on this, I never noticed that style forkplate being used on the lil indians are they correct? I would have to say its early to mid 60's if the brake provisions are not there. The welding of the engine plate and welded on kick make me think there was some "work" done to...

Boonie jackshaft mounting plate with nice jackshaft and newer sprockets. Mounting plate is original. Sprockets and shafts is not. Single speed setup. Good parts. $60 shipped. I can email or text photos. Located in west michigan.

Twenty bucks, I couldn't say no. There's a plate between the handle bars that was sprayed over with green paint, and then some kind of mounting plate (headlight, perhaps?) was screwed over it. Across the bottom, I can clearly warns you about 'off-highway use only', that sort of thing. Across the...

Is there an adapter plate for a Briggs Raptor that will allow me to adjust it easily (similar to the one for the clone)?

Trail Horse or Bonanza engine plate, must be in good shape or very repairable.. no boogered up slots... Also looking for good TH lower fork legs..

Does anyone have the seal numbers, Pto & Ign. plate for the West Bend 580

Dunno much about what it takes to have something like this done and if its gonna be worth it over me just cutting them out myself?? I just bought a box lot of Kickstands, 12 of them have a bracket setup that will not work for mini bike application, and I want to simply cut that part off and...

Is the GX200 clone from Monster Scooter Parts a direct fit to the Hawg Ty mini bike? I mean the engine mounts to the existing engine plate without modification and the clutch plate mounts to the 4 bolt holes around the engine shaft without modification? The listing does not list the bolt...

Hi. Anyone know what the correct original color was for the Rear fender/ Licence plate bracket for 1971 and up Rupp Roadster Etc. I know black, but flat or glossy?. Thanks

Does anyone know if there is a sticker available for the Manco Trailcat Fork Plate? If I can't get the sticker, does anyone have a good sample of the Manco Trailcat I can make a copy from? Jerry....

I posted this in the general section earlier, but maybe it belongs here. I am working on a go kart , but it only has part of the drive clutch. As you can see it is missing the stationary plate. I really dont understand Comets numerical series , at any rate I am in need of the stationary plate, ...

I am working on a go kart , but it only has part of the drive clutch. As you can see it is missing the stationary plate. I really dont understand Comets numerical series , at any rate I am in need of the stationary plate, . The clutch I have measures 5 inches across, and is a 5/8 keyed...

I know the one is a bird. Not sure the model. It had the serial plate sticker only thing I could make out is bird. It has 5" split rims. Everything appears to be original except the motor. Not even sure about this one. Any help would be great. Come out come out where...

Thanks for dropping by! My old Stellar has a plate that clamps onto the forks between the upper and lower trees. It simply clamps on due to its curved edges that grip the forks. Mine has actually rubbed itself through on one side due to a broken weld between the fork and tree. Can someone help...

This is local to me for "make an offer" and I know nothing about it. any body know what it is? looks like the bars are chrome, I thought maybe a Pinto but the fork plate doesn't look right. Also looks like a hole in the frame behind the seat ,maybe for a grab bar or something?

NOS Bonanza MX, MB, CR, aluminum brake plate. Hard to find ! Price is $45.00 shipped. PAYPAL ONLY !

If I use an engine plate on my Warrior (with either the stock engine or a 212 Pred Hemi) to provide clearance for the TAV clone, will it interfere with gas cap removal/installation and refueling? Also, if I do NOT use the engine plate, will I have to cut off reinforcing ribs and part of the...