plate

I purchased a TC2 torque converter kit for a predator 212 part number 1002p/218353a 1. With the engine sitting on my Alexander Reynolds The mounting plate does not set right.I took the engine off and put it on the workbench installed the plate and the driven wheel (back wheel)of the torque...

I've been searching quite a bit and it seems randomly hit or miss for reproduction stickers for many of the things that originally came stickered up. HP, engine brand, fork plate stickers etc. Is it a matter of clicking around or am I missing a big supplier? Thanks

New mini bike frame with 6 inch new tires and wheels. New seat. Unpainted one inch diameter steel frame. Heavy duty frame for racing. Jack plate assembly included. Has brake drums and shoes on rear wheel

The carb on this style Tecumseh 2 cycle hits the bar on my Minion Cycle. Can the intake manifold be moved to the spot on the back with the stuffer plate? I know on my McCulloch i have another intake there.

I have a Baja (mb165 I believe) mini bike on which I installed a Predator 212 with a Chinese made torque converter from OldMiniBikes Warehouse. The chain rubs a little on the inside of the converter plate so I believe the alignment is off slightly. I installed a new engine mounting plate and drilled...

No engine plate. Need help identifying

needing a manco thunderbird fork or a fork with 5 1/2 inch spacing plate to plate. thanks in advance:thumbsup:

I need To buy a T.C for my DoodleBug and predator. I was obviously going to buy the whole kit that come with the comet style aluminum back plate, but was curious of opnions about the cheaper steel stamped rectangle backplate. Any comparison of the two? Or opinions?

Hi . I just got my new predator 212 motor from HF and adapter plate went to install motor on newer style doodle. And the engine wont fit took adapter plate off and the engine hits the bar in front of back tire. Has anyone else have this issue? if so, got some pictures you could share.

Finally picked up some chromoly pushrods and guide plate. iv been running the stamped 1.3 rockers and black mamba sr on stock pushrods for awhile. wen I installed the guide plate it raised up the rockers should I get longer pushrods or did I install it wrong lol or should I get the rs guide...

Super Taco!! I believe this to be a 1971 model. Excellent candidate for a restoration. Nice and straight, no broken welds . Still has the original Steens sticker on the top tube, and the serial number is legible (SC89). Someone slathered red housepaint all over it, those are the big chunks seen...

mini bike frame Hell the switch plate is worth more than that.

This is my computer generated photo / sign, I did not want to lay out all the parts in the Snow. :laugh: . . If You wish to look at the start of this story? Go To the Thread > http://www.oldminibikes.com/forum/project-logs/95845-mini-drag-bike-build.html It is basically a collection of parts...

From what I understand you have to drill holes to use this plate. If so what is the purpose of using it ??? Wouldn't it be better just to line up the engine (Predator 212cc) and make slots anyway ???

Chain tensioners on these Doodle Dirt bikes. I been trying to figure out how to adjust my chain tension, it seems no matter I adjust it the chain doesn't get any tighter. I took a couple of links out, I am trying to put a 5 hp Briggs on the frame with a OldMiniBikes mounting plate. Of course with the...

I will be doing a lot of diamond plate.

i have a couple different TAV jackshaft plates that have both a bottom motor plate as well as a side mount plate that bolts to the side cover. got them unattached but when i go to try and use them, if i line up the bottom plate the side plate is almost a half inch away. i have TAV plates...

In need of one cat switch plate. Need the larger one like used on 400 and eliminator. Have $cash$ ready to send. Pm me with a pic and price.

Yes I know the tank says roadster 2 on it just want to make sure. The front wheel is 12" and the rear is 10". Is it supposed to be like that. What year is it. I've tried looking for some kind on plate or sticker to ID it but can't find one. Any help?

Hello, looking for a Boonie bike jackshaft plate or the dimensions to fab one up. Thanks