prix

I need some room guys ! If anybody is Interested the whole bike I'll sell it minus some parts. 5" Original rear wheel, good tire and good bearings $35.00 Original louvered clutch cover with a few extra small holes $65.00 Original metal seat pan and covered by manchester1 $60.00...

I'm wondering where I can buy a Taiwanese Grand Prix minibike square decal. Someone noted in the past that reproductions were being sold on Ebay but I haven't been able to find any. Thanks for your help.

I have no idea with one this is would like to find proper wheels.......and info on it thanks

Grand prix seat

Grand prix seat

Grand prix seat

was at a friends place n he had this leaning against the wall,said it wouldnt run. bought it,brought it home,sprayed it,fired right up. prolly just needs a carb cleaning. it does need handlebars tho,at least the right side one. ( any help there would be awesome,this one is for my youngest :) )...

, I have had this Grand Prix sitting in the shed for years and it is one ugly :chinese::001_9898:....and I almost didn't do this build but by meeting a new neighbor and friend that has a Efenal mini bike fixed up and it looks pretty cool ! So I decided what tha heck, this old girl deserves a...

Can someone tell me what this front wheel is off of ? I know the bike is a Grand Prix or something like that.

Hello again, I began this project with old Grand Prix frame with front tire and shocks. Put old tecumseh 5 hp from ariens snowblower. Ordered basic parts today: 6" Astro wheel kit with 60 t sprocket, Hilliard 3/4" 12t clutch with 35 chain. Throttle and cable kit, rear axle, etc. what type of...

I have a 70's Grand Prix frame that I'm putting 5 hp tecumseh. It originally had full suspension, and I'm looking for a seat and rear shocks or alternate ideas. Thanks!

5" Alloy front wheel and tire for a Taiwan made Efenel, Missle, Grand Prix. Tire is usable but has cracking when squeezed. Tube does not hold air. $65 shipped - Paypal - Wisconsin

I have been looking for a 60s race Go Kart for some time and today I got a true "barn find".The kart was in the barn for more than 15 years and came with wood chips and straw.It will take work but it is all there. It has turbine wheels all around but the back tires are 14.5x5 and have to go.I...

What you see is what you get. MTD frame needs some SERIOUS help/work in the engine plate area. Grand Prix frame has had a plate welded on behind the neck tube, but is otherwise all there except engine. Handlebars also have welded on one side by the mount. $150 takes it all. Please PM me...

Thanks for having me as a member first, second I am the proud new owner of what I think is a grand prix ,in terrible condition, by doing some research I found this site, and have some questions, the rear hub, rim,tire, axle, etc is missing, my main concern is if most of these parts are standard...

Wanting set 2 piece handlebars, Grand Prix, Scat Cat so on. Like in pic's There 4 the early standard model grand prix....

Hey everyone.. Just thought I would share some photos of the new project I just finished.. A member in another post of mine sparked my interest in this add-on lighting alternator that was available for Tecumseh engines years back.. Well I was lucky enough to find a few NOS kits, and I snagged...

I started with this. Then,a trip to the hardware store for spray paint,tape,a few nuts and bolts,and some spacers. One afternoon later: I'll use the 79cc Greyhound on there at first to test the durability of the pocket bike wheels. I added the plate to give it a club racer look to go with the...

Here is my Grand Prix Deluxe-I like the look of the pocket bike wheels. Perhaps my 79cc Greyhound 2.5 hp will do the job. I still haven't decided whether or not to repaint it-I probably won't.

Spotted a go kart today on Craigslist. The listing said $50. Talked to the guy and he said the kart needed some work. Well I went anyway wasn't too far. The kart was a piece of junk but this one was leaned up against the garage outside. I asked if this one was for sale and he said sure...