All items are in used condition as you can tell, but all function perfectly. Tomar 2 disc stellar 4 clutch it comes with a 16 Tooth clutch sprocket and engagement it at around 3800, but it can be adjusted by removing the washers on the clutch or tightening or loosening the springs. Genuine...
I have bent the alum plate a couple times and wondering if anyone else has this problem. I ride my DB30 pretty hard I suppose, because I have also busted the chords on the tires too.
The 1st time I noticed it was bent, I removed it from the engine and straightened it in a vise. The alum...
I'm updating a stock 2.5 DB30 that currently uses a promod jackshaft. My question is if it can be tranplanted to a new Lifan 4hp?
If so what gearing changes should I make?
Also, I'm updating my Preditor DB with a jackshaft kit also and need to now the gearing needed to make it the best...
You may also know him as "Brad" the owner of hotrodminibike.com
Once again, he came through and helped me out today...
I'll spare you the details, however, suffice to say I was having some "challenges" installing some replacement parts that I had purchased from him (My fault, not his), and he...
Well since I couldn't find the thread I was posting on, I thought I would start fresh w/ this discussion of chain alignment w/ a jackshaft on a Doodlebug.
It seems w/ all the adjusting I have tried I just couldn't get enough slack out of the back w/o putting my tensioner in a different...
There have probably been threads about the ProMod Adjustable Motor Mount and the PMR Clutch Cover before, but I'd like to add a little mini review of my own.
Both of these products are available individually or together in a kit with a clutch, along with other mini bike modification products...
I just saw the "jackshaft vs. 6.5 engine" thread and now I'm wondering if I did the wrong thing.
I just picked up a 212 Predator to replace the 2.5 Greyhound on the Sensation. The mini's gears are 12/60 and it has no almost no pickup or ability to get up a grade without a running start.
I...
I'm trying to figure out how much trouble it will be to mount the 212 Predator to the Sensation MB-6A frame.
I can see the new engine is not going to fit as-is. I need to know the overall dimensions of the ProMod adjustable motor mount plate. I think I read somewhere that it is 1/2" thick...
I have a ProMod jackshaft connected to my original Doodle Bug engine sitting in the garage. I'd let it go (Engine and jackshaft) for $100.
Located in Cypress, Texas.
Wife let me buy a motorcycle on the condition I sell the mini bike & parts so I have to get it out of the garage. :(
Anybody have a ProMod jack shaft on their Baja Warrior/Heat mini bikes? I was going to buy a TAV, but I stumbled upon the ProMod jack shaft on thought that if it made a decent improvement I would look into it, considering the comet TAV is $196 and the ProMod jackshaft is $99.
Doodlebug Performance Engine Install Kits
Mini Bike Hyd Brake Syst
Located in WPB, FL.
Here's the deal....
Due to a USPS screw up, I now find myself with TWO ProMod orders about to be in my possession.
I ordered the stage 1 upgrade kit and the hydro brake setup (^^see links...
Hi All,
Here's a quick video of our ProMod GX200 Engine.
The engine has just been freshened up for the first time since we built it over a year ago. Quick blip of the throttle, and surprising we saw 9000Rpm on the Alfano. Only 'Tuning' to the engine apart from the rebuild, since we changed...
Brad Holtorf @ Promod has the bolt-on hydro brake conversion kit for DBs in stock again.:smile: This is a OldMiniBikes group member-tested and proven product at a reasonable price of (only) $ 43.00. I just ordered to sets yesterday afternoon and they have already been shipped. :thumbsup:
Why take...
I just got a new style frame db30 and put on the jackshaft kit from promod. I really like it. I am a 230lb rider and the jackshaft provides quicker takeoffs and easy hill climbs even on grass. I rarely have to put my feet down now. I also bent my handlebars foward a little with a 3/4 in...
Did this as a father --son project. Highly recommend it. My son was really in to it. He did almost the whole thing by himself---and he is 8. I just tightened it up a little more and explained the directions.
Got some more stuff for my son's dirt bug from Pro Mod..I want to thank Brad for the quick shipping and extra hassle he endured getting this mailed out to Canada in time for Christmas..
Boxing day we got out some cardboard and brought her inside where its warm and I put him to work.
We got the...
I saw a Kohler 6.5hp engine for 185.00brand new--shipped to my house. Cast iron cyl. liners. Wouldn't this be a way better engine for only $55 more than the Harbor freight engine? So what other engines fit the ProMod kit without any mods/drilling?
would really rather trade something for it.bored stock carb 6.5,any perfomance enhancing things for clone etc. i put a comet 30 on my db now and dont need it.thanks.
I have a DB30 stock engine. I read reviews and found out about the ProMod jackshaft kit and I really want one. A brand new one w/shipping for me is 131.15 a little much for a teenager right now. So I want to see if any of you may have a spare or one you don't want/need anymore up for sale...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.