shaft

Hello I am going to try to build new jack shafts for my Tote Gote Model B/400since it doesn't look like it is easy to find a replacement. It has the pillow type bearings on it and I know I can get those at Tractor Supply. Does any one have a teeth count on the gears that came from the factory...

Hi again. Please refer to my other thread in this forum as to why my Baja's stock 200cc engine is not currently running... Hopefully two of my dad's mechanic friends can figure it out soon... I spoke briefly with several small engine repair shops in my area and they don't do work on clones...

Ok, got my gote all torn down and am in the process of cleaning/degreasing. Upon removing the rear jack shaft - the one with 2 sprockets - I noticed a noisy bearing. Anyone have any info about replacements? Thanks! Tote Gote model 706

I wanted a front peg jackshaft. It said "out of stock". Mid pegs are slightly longer and available so I ordered 1 with the intention of modifying it to fit a front peg. after placing the order I was informed the mid peg is not available but 2 front peg jack shafts were on the shelf. I...

I am trying to get my VT-1 up and running. I need to get a motor and the jack shafts. Motor I will figure out... Any suggestions on where to find what I am looking for or if you are selling it let me know!! Thanks!

I bought a Predator to replace the gx200 on my baja warrior. I didnt realize til I got it out of the box that the Pred has a inward taper that you would screw something into. While the gx200 has a protruding thread that you have to screw the castle nut on to. Now, my question is, how do I...

1st post here. Just got a used Motovox MBX 10 minibike and was going though it before letting my son ride it. Removed the clutch assembly because i found some slop in the fit of the clutch key/key fit. After removing the clutch, the shaft if broken where the key sits in the shaft. What are...

anyone know if these motors have a 3/4 shaft or metric:censure:? it's a 5.5hp on a hawg ty:out: i also have this in the engine section:shrug:

Hi OldMiniBikes'ers, Does anybody know the original/stock jackshaft, clutch, and rear sprocket gearing for a 1967 Taco 44. 3hp B&S. It did come to me with an 11 sprocket clutch, 16 and 11 on the jackshaft, and a 60 back wheel sprocket. The clutch sprocket and rear wheel are in good shape. But, the...

Anyone know what the thread size is? I would assume it's an M15(which isn't common) but I have no idea what the thread spacing is. Anyone know where I can get one?

I got 3 BnS engines froma yard sale. 2 of the 3 have dual output shafts. Is there a way i can remove the secondary shaft? I was debating about cutting it off.. Any ideas? Thanx in advance..

Looking for the following parts - PN#165-030 and 165-031. I am told they are no longer available and OldMiniBikes is out of stock. If anyone has one or knows of some alternatives please let me know! -Ryan

I know some have seen this , but it may help others if you know a good machinist . I got this Honda 160 with a DB-30 purchase , well it didn't have a clutch on it ? Yep pressure washer engine , tapered shaft and no key-way . My Buddy chucked the whole engine in lathe ( removed spark plug ) and...

I need a engine with a 5/8 shaft. Preferably a Briggs and straton 3~5ish horse power.

Trying to find the shaft diameter on the 212cc predator engine. Also, the diameter of the 97cc. Search has turned up shaft length, rotation etc.... Thank you!

The local Machinist here in boring quoted me 30$ for him to turn my 7/8 tapered shaft from my hm80 tec down to 3/4 and cut the keyway!!!!! Hes an awesome guy and does excellent work! This is the first shaft Ive had done so im like a lil kid waiting to take it down monday...lol anyway i figured i...

Hi there... I am currently building my first minibike and all is going well...I had a somewhat related question I thought you might be able to help me with. I have an OLD 3HP B&S portable water pump. I want to connect my old 97cc Baja engine to the water pump to help water my garden. The...

I've been searching for a 5/8 shaft lighting coil for a Tecumseh 3.5hp engine from the 1960's-70's era...Does anyone have one for sale? Thanks!

Ok here is another long shot :doah: One of the guys I work with is restoring his old push mower and needs a Briggs model 6BH :shrug: from what he tells me it was made in the early to mid 50's :shrug: he doesn't need the tins or fly wheel but every thing else would be nice :thumbsup:

Hello,newbie here. I used the search function and couldnt find anything. My problem is that upon installing a new 212 on a bonanza 1400, I soon realized that in order to align the chain on the clutch with the jack shaft sprocket I have to have the engine mounted off center. I can simply move the...