sprocket?

First of all I would like to thank all of you who have given me a ton of good info on my project. I have a 1974 Alsport TS110 built by Promark. I am looking for any information on a replacement rear sprocket that bolts to the Peerless 133B axle. Are these sprockets available or is this...

A while back I bought a set of new Astro rims with a 60t sprocket, I had issue with it throwing the chain no matter what I tried and I was told by other OldMiniBikes members it likely isn't true on the face. Now I understand how to verify whether or not it is true with a dial indicator, but how could I...

Hi guys, I' m new at this so I need some help. I'm building a mini bike for drag racing/ fun. Here is what I have, an intek engine with WF rod and piston, animal cam, header pipe and a slider carb Pz27. The rear tire is 11.5" in dia. And a 14 tooth clutch also. Now to the questions. What rear...

What is the spacer depth for the Lil Indian small frame wheel? I need to know how far the sprocket sticks out from the hub so everything will line up.

I need a drum brake for a Bonanza MB1210. How do I know which brand such as Bendix I need? The sprocket is 35 pitch but I see no other markings. Anyone know?

I have a Baja warrior with a 41 tooth rear sprocket. I want to be able to ride, but pull the front tire up to lol. What size do y'all recommend? I've lightly modified. New Carb with bigger tube and jets. Header pipe, k&n type air filter and a 4° advanced timing key.

My 1946 Hiawatha bubba'd mini bike's drive sprocket is worn. I've looked here and other places and see a sprocket that is that is close to the same but has the wrong mounting holes. Mine is as follows: 60 tooth #35 chain two inch center hub hole Three mounting holes 2 1/2 apart,center to...

Does Anybody know if the six hole pattern on a D/B is the same as a Disc brake on a bicycle?:shrug:....Scootercat....

I'm looking for a 60 tooth #41 chain sprocket. it is a 4 bolt hub with a measure of 2.55" (6.5cm) center to center. it had a center whole measuring 1.89" (4.8cm).

How do you change the sprocket on the clutch? or is it possible? I wanna try getting a little more ooomph out of my db30. :shrug:

5/16 bolt holes, 2 7/8 across

Go Kart Sprockets & Mini Bike Sprockets The second sprocket down that page, will this fit a DB30? I know that the DB has 6 bolts but i am not sure of the measurements. Otherwise, where can i get a blank sprocket? Not one with no teeth, one without mounting holes. OR one with holes drilled, but...

Hello everybody on the site this is my first post. I have an original Ruttman frame that will fit 6" rims. I think the axle size is 3/4" but not sure any help there would be great. But my real question is can I use the 6" Astro wheels with a sprocket? and how would I mount the sprocket? with...

eBay Motors: DISC BRAKE ASSEMBLY MINI BIKE, GO CART, GO KART (item 130244463670 end time Aug-12-08 07:51:57 PDT) My mini bike has a bracket type thing on the left rear frame right above where the wheel bolts on. I'd like to find a way to make this fit on there and use the sprocket. But... i...