I'm looking for a working B&S starter rewind ( spring, pulley, rope, shroud) Model 091212 Type 021901 Code 960724FA, 3.5 hp. used on an edger.
OR, suggestions on how/what I need to do to fix the rewind. I replaced the starter clutch. Thank you very much. :shrug:
Hey guys I'm in need of a recoil starter for a 196cc Lifan , The Blue clone . The predator recoil will not work as the starter cup seems to be deeper . Please let me know if you have one to part with ?
For sale - Nice Tecumseh late model mid 70's or so horizontal shaft blower housing stamped H35 45850k Serial 50221B this setup is for the RV (mini bike version Tecumseh's) It looks really nice 5 light coats of paint and 5 light coats of clear.
Also for sale is the matching backing plate...
So, i found a Honda GX160 in the aluminum dumpster at the junkyard.. Looks like Smokey was the one who unloaded it, judging by the excavator damage to the sheet metal.. :glare:
It looks as if the (stuff) is there and good, original key and all.. It was zip tied to the shroud.. :confused:
I...
this thing is heavy, it does work on this tecumseh :scared: 1st 3rd and 5th are pics of starter and numbers on backside of the starter , 4th pic is the starter cup , when i got this it was on a 1955 briggs , is it a tecumseh part ? , thanks
Hey guys. I'm looking for a recoil starter for a very old Craftsman engine.
I checked around a few local spots and was told several times that I couldn't order a new one, so hopefully someone could help me out.
Here's a picture of the bike.
I been playing round with some old round top covers and converting them to the newer cup style starters for a couple modded 5ers.... The clutch or ratchet style recoils don't hold up well to added compression and rpms as well..... This cover still needs a little body work and it's ready to paint..
(This started out as just a basement repair job…but I thought it might serve as a tutorial for anyone who finds themselves fooling with one of these contraptions.)
So I had an old Tecumseh kick starter hanging on the wall of my shop for years. Although it was in good shape, two of the springs...
How hard should an H50 be to pull start. I broke 3 pull ropes today. I'd like to think I have really good compression but I'm not sure if that's it.:shrug:
When the piston rings are new, does that make a difference ?
I have a small B&S engine on a lawn edger. When installed on the engine, the recoil sometimes recoils, but most of the time it doesn't. When the recoil is not installed, it will always recoil. So I'm guessing its not the recoil spring. Any ideas and/or what I do to fix this ? This is a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.