I forgot there was a difference. I need the front peg swing arm. I believe it's not as wide as a mid peg swing arm.
At least I got a tin of Christmas cheer with it. :thumbsup:
Thanks mama & papa for shipping them out in crazy ness that was Saturday morning.
Im looking for a swing arm for my heathkit boonie. But id like to keep with the wider rear tire. Not a fan of bigger frame bikes with littlr wheels lol. Im not sure what other bike would have that swing arm than a hilltopper. Please let me know thanks!!
Dug up an old Bonanza and figured I would fix it up a little and drive it back and forth from my home to my shop. It has been sitting out in the elements half covered in dirt for I don't know how long. it rolls and jack shaft turns but the brakes are frozen. the sprocket also rubs a little on...
Anybody have a 9 1/2 swing arm shaft in there stash. Its for my Bonanza MX rat for Windber. Looking for the original style with the clips on the end. Thanks everybody:thumbsup: OldMiniBikes is out of stock
9-1/2" SwingArm Shaft- Fits Bonanza Mid-Peg
saw this being done in other threads and thought i would
give it a try. it didn't work too well. i used a spark plug
to chuck the head, not the best idea. the washer must be
moving around:
i might try removing the washer or turning a piece with the
threads on it. my little lathe has...
Hi I am new to the site and would like to find some information on a Montgomery Wards Mini-Bike. I purchased the mini at a swap meet with some parts missing if I could get some pictures as to how the rear swing arm attaches to the main frame any help would be appreciated. Thanks for now SCM
I picked up an old Rupp to restore.
I have it painted and am putting it together. I put the swing arm back on the frame the same way I took it off, but it doesn't make good sense to me.
It attaches with 2 bolts and lock washers into threaded inserts in the frame, and that's it...
If I tighten...
I'm looking for a K&S swing arm shaft. May have to have a machinist cut one to length and cut c-clamp grooves. The distance between the jackshaft plates is 7.5". I estimate that with c-clamps and washers, the shaft would need to be 8.5" long.
Hey guys first post. Been trolling for a few days. Got this rolling chassis this morning. Before I customize it to my liking I'd like to indenyify it. Swing arm,split motor plate front suspension is inside the front fork tubes.
]
All in good shape, fenders could use a rechrome. Forks are not seized. Very restorable. No swing arm. I can get more pics on request $125 obo plus shipping
Even just forks, or frame with or without swing arm.
Prefer the whole frame with swing arm and forks though.
Condition not important. As long as its not bent up or real rusty.
Jerry 602-790-2486
ohanlonpa@cox.net
Although I have been looking for a buildable 22 frame, I now am a contented member of the Bonanza Boys. I bought a Bonanza vintage frame ( serial #39734 stamped on the badge on number plate on the forks) that has no suspension on the forks, and it looks like someone clipped the ends of the...
Show them what your made in the build-off with the hunk of :001_9898:
Aggie 98 swing frame, Its really not that bad before i cut it up and make a ladder out of the frame if anyone needs or wants this $24 plus shipping. quick qoutes on fedex are running around $35 to NY to $45 to...
Looking for a Rupp 500 swing arm, damage free. Bought a frame on here recently and it was shipped unboxed and received quite a bit of damage. I was able to salvage the bent forks and frame but the swing arm is bent, kinked and twisted beyond repair. Looking for another.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.