tire

I need a 6" Azusa wheel and a good quality tire. I have a 5inch currently and can't keep tube in it.

I got this wheel on a Manco bike that I bought ...but I can't use it for this build. Wheel seems to be in good condition and comes with the original 4.10/ 3.50-6 Riverside tire , the tire holds air but does have a spilt in it on the side wall under the numbers. $50.00 or best offer plus actual...

I have the Promod Jackshaft system on the Purple Monkey with a 3HP predator. The rear tire is a 6" 4.10x3.50 tire. On left hand turns the chain hits and break the master link and the chain falls off. Is getting a bigger tire the answer or is there another fix. Id like to keep the 72 tooth...

Model # or name would be great. Help him out.

Just got this with a Bonanza bike and wont use it: Nice usable shape, the is a genuine speedway marked tire 3.50x10. Last three pics show it aired up with 28psi in it to give you an idea of overall condition, lots of tread and the tire is pliable and not hardened up $37 + 13 ship Wheel is...

Here is an example of what you do for your child when he's full throttle heading for the catch fence....... You take a wheel, a tire and fender into the calf muscle ! And he didn't get a scratch

NOS and still in the factory wraps from Pirelli 3.00 x 10" MT74 tread tires, these were factory tires for a few of the Benelli mini cyles as well as a few other italian bikes such as the Premier/moto beta. also an option for the Harley shortsters and X90's, speedway also used a tire with the...

I'm new to mini-bikes and I took the baja through some pretty deep wet mud yesterday and the rear tends to kick out a lot. The tires are old and probably need to be changed. Any suggestions on a good tire for mud?? Would moving up a tire size help any?? Where I hunt the ground is very soft...

Found this big wheel thing for only $1000 must b the pvc tire covers Custom built Motorized drift trike

Anyone in Maryland or Virginia have any old trikes for sale? I've searched high and low and cannot find any local. They all seem to be out of state. I found a Tri-Sport RTS SL in N.C. but I got lucky as the seller has family in my area so it is going to be delivered. But I wouldn't mind...

Hey Digger guys, here some of the correct Carlises that came on that bike, problaby work on the sears fielder, and some of the other bird bikes too! Not an easy tire to find I was looking when a cleaned up ther digger I had to no avail. 3 50 x 10 Dirt Bike Mini Bike Tire | eBay The...

Guys, I picked this up from a member on here a week or so ago. It's a full complete bike but the motor needs a pull start and cup, and new coil. Other than that, the motor runs etc. It could use a rear tire as well. Just needs tweaked and some TLC and it'd be a good running big tire bike. $300...

Guys I am looking for a Powell mini bike. Also a big tire bike as well. Any help appreciated. Thanks..

Looking for a big tire roller. Boonie would be great.

I am new to the forum, so any help would be greatly appreciated. I am looking to build a big tire mini bike for my son. Can anyone help me with what the best frame, brand, is. Also if anyone knows of one for sale please let me know. Im not worried if it is running or not. Just want complete...

All parts are plus shipping from 70737 Louisiana , pay pal is best but I'll work with anyone as needed ! DB motor , does run $25 , if you only need parts off it let me know , DB front wheel $15 , DB front axle , nut and spacers,$10 , DB rear 70th sprocket $15 , DB seat cover no tears $8 , 5"...

Where exactly do the springs go on this thing? I think there would be one from the hole to the other hole on the left? Or all the way to the engine mount? Also, the only way the brake plate stays off the tire is if I apply pressure right where my thumb is here. So there must be a...

Why is it such a pain to get the haves of a two piece rim off the tire on a mini bike? In the process of mounting a new tire on a new rim I put hole in the tube so now I need to get the rim halves off the tire to put in a new tube and it is proving to be almost impossible. Before mounting...

I have to thank Jeep2003, LowandWide and Paticus for their detailed project logs for their fat tire bikes. :thumbsup: Lots of good info there... and sweet looking bikes.. The first pic is a 1/4 scale drawing I made. I wanted to be sure the seat height and general fit would work out. 50"...

what would cause an engine to pop when getting off the throttle? i have a hemi slightly built. i took it out on a stretch of road and was doing 40mph at 3500-3700 rpm with an 80 tooth gear 15 inch tire. all the while not giving it full throttle, little scary with no helmet and shorts....haha i...