welded

  1. N

    Rear frame bolt instead of welded?

    For some reason I cannot upload a picture. I am looking at mini and the looks like lower rear frame horizontal and verticals tubes are crimped then drilled and held together by the axle bolt. Does any one know what this is?
  2. T

    Thirdeye's DB30 rebuild - welded!

    So Ive had my db for about 3 years now and the paint was starting to go back to red. So, I decided to tear it down and rebuild it from the ground up! Well, my foot pegs were beat to hell and bent outwards and one of the brackets broke off. So I needed to get some welding done. I ordered up the...
  3. H

    cat dominator forks

    I'm looking for cat dominator forks or just one side of the fork .one side of mine has been broken and welded not strait thanks
  4. xr7gt

    1970 Taco 22

    70P114 Complete with replacement 3.5 engine. Crusty paint. Original seat. Forks have been welded above spring on driver's side tube. Jackshaft sprockets and wheels move freely $250 or best offer 951 751 7232 Pick up or i will work with you to have it Shipped out at your expense.
  5. massacre

    Blockzilla Bore Size

    Can a BZ3 block be taken out to 3.5" bore? I keep reading conflicting things. Also does anyone have pics of where these blocks get welded for strength? Any shortcomings of this block that I should know about? Will this block take 50hp? Any recommendations on brand as far as side covers or...
  6. J

    Steens Lil Pal

    After identifying the bike I purchased it. The guy selling it was a hoarder and it had been sitting in a storage unit for some time.. The tecumseh on it isn't worth anything, but the frame is really straight. They have welded a skid pan to the front and bottom of the frame. This is ugly, but...
  7. J

    Someone To Bend and Weld A Custom Header For Predator

    Need 1" custom bent Predator header, underseat style like OldMiniBikes but more compact, shorter, flange welded, etc. contact me for details and quote. Thx, JB
  8. EricDett

    Looking for 6" Aluminum split wheel match

    I have attached a picture of a 6" wheel that I'd like to replace because this one has two cracks in it. I'd like to find the same style wheel to match it's mate. Might try having it welded but I don't know if that is even possible. Thanks
  9. OND

    Experts Advice Please

    Hey guys and gals I need some advice, I'm building this old EZ Rider for the build off and this is some of the mess I've had to deal with. So this is what the upper frame rails looked like before I cut the welded places out. I 'm still not sure why this was done.
  10. mlanzoni

    Rupp Handlebars 69 or 70

    WTB 1969 or 1970 Rupp Handlebars with the welded c fasteners. Thanks.
  11. J

    Cheap Lil Indian...

    I found this roller on the local craigslist. I purchased it primarily for the wheels. Upon the purchase I found that it had the rare accessory scrub brake... Lol.. They also took the spring off the fork mounted and welded in a spacer?? I'm happy to say this is my first purchase under...
  12. deejaaa

    my new aluminum Tig welded tank

    found an aluminum sign buried in some mud after some ditches were dug. looked like some new housing was being build and sidewalks were being added. flattened it as much as i could, laid the older heavy tank on it and made some marks. using a metal shear, cut out the pieces, cut, shaped them...
  13. poorboy

    welded on sprocket

    1970 atlas with 4 in one-piece rims. #35 sprocket which is welded onto the hub from the factory. I'd like to be able to change sprockets and the teeth on this one are pretty rounded over. Any ideas short of buying a new wheel assebly? Also, how do you all remove and remount your tires...
  14. gumpit

    He said the forks are welded but is it worth $110?

    ***** MiniBike ******
  15. hojo

    Mini Bike welded from scratch: ELEANOR

    I received all the tools, steel, and a welder from christmas and I have been fabricating my own personal bike from scratch :out:. I first designed the bike to scale on google sketchup, then I just mimicked the dimensions when building up the frame. I have the harbor freight clone 6.5 engine on...
  16. 125ccCrazy

    Anyone have a lobe crack on a welded cam?

    I just got a used 308 cam from a guy off the karting forum for my clone, everything looked pretty good until I ran my finger nail over the one lobe and felt something, I looked close and it's a hairline crack right about where they added to the original lobe like the weld didn't penetrate into...
  17. Modified Thumb Type Installed W/ Welded End

    Modified Thumb Type Installed W/ Welded End

    Modified Thumb Type Installed W/ Welded End
  18. cncd11

    welded lifter area

    can anybody show me some before and after pics of the lifter area before and after welding on the 5 hp briggs blocks?
Top