welding

After pic of a repair to a broken/cracked frame

Before and pic of a repair to a broken/cracked frame

Before and pic of a repair to a broken/cracked frame

After pic of a repair to a broken/cracked frame

Ok, I'm not a welder so this might be a easy answer that I'm not understanding. I have a tank. It leaks in one spot where someone already tried fixing. So I cleaned area and tried JB weld and it still has a soak type leak. Now the tank has been dried out and no gas. So I take it to my local...

I took a community college course on tig, mig, brazing, and plasma cutting 5 years ago. I have a Lincoln 170 (old) and just bought a Lincoln 180. My welds suck!!!!! I don't seem to be getting any penetration or I blow a hole through the plate or tube. My roll of wire is flux and is...

Hey guys, first post here! I've been lurking around the forums here and there since picking up my model B tote goat a little bit ago. I had one of these growing up and I'm stoked to be restoring this one, but alas I've already run into a conundrum and would love to have some opinions on it...

frame modifications to a bicycle frame

frame modifications to a bicycle frame

frame modifications to a bicycle frame

frame modifications to a bicycle frame

I am looking for a jackshaft that requires no welding . I'm looking for a jackshaft for my boonie bike. I was thinking of just going down to a machine shop and asking how much it would be to make a copy of an original boonie bracket. I was wondering if there's anything else out there ? I saw...

I did a search and could not find a welding tec and supply. So I thought I would start this and if you have some good ones to add, please do. Aluminum Braze; Hobart Low Temperature Aluminum Brazing Rods https://www.youtube.com/watch?v=TaSORWC-BMU Stainless Steel Braze ; Silver...

O.k. Other than using the cheap 90 amp HF welder I am not too familiar with welding. I have access to people who can weld some stuff for me. I know some do use gas some don't some use wire fed and some use welding rods. What are they arc welding? Brazing? Both? I am trying to find the...

Anyone has experience with mig welding with generator power? Im thinking about buying kemppi minarc 180, takes it power from 230v socket. I already have generator with 13hp motor and it provides 230 and 400v but it cant even run air compressor with 3hp 230v motor.:doah:

Does welding the sloppy clutch bell to the driver improve the clutch shudder and vibration? :shrug: Lifan 2.8 power.

A few years ago I built a welding table and it is great! However, welding debris and grinding particles are constantly getting all over my magnets and it is a pain; so, I bought a little metal wheel, a lazy susan bearing and a piece of steel and today built what I think will solve the...

Anyone out there using one of these torches (Henrob style) DHC-2000 Welding and Cutting Torch Looks like they do about everything a person could expect from a torch. Almost seems to good to be true!

Can I weld on my minibike with the engine still mounted? Its a plastic gas tank (with gas inside) and I want to weld a nut for a bolt next to the rear axle, some front and rear fenders and extend one of tge foot pegs. I really don't want to remove the engine but if I have to I will....

Alright, took a welding class in college, and loved it. Mig, Tig, stick, oxy / acetalene cutting, little brazing, and some plasma. Anyway, I'm a descent welder, and looking at the Hobart 140 :thumbsup: Really excited. So, I guess my question is....I'm looking for a good welding hood. In...