Said to be Sear Roper 6" wheels and the seller has other roper stuff. Old 6" tires looks like and the wheels are aluminum. I got em for $69 buy it now on Ebay with $19 shipping or something like that. I have a roper that needs wheels so I will use them but I do not think they are Sears Roper...
Hi I'm a new member and just got my first project minibike. Kind of a barn find. I have 6" Alton wheels on it. The old brake setup was the lever with the plate that rubbed on the tire. I would like to change that to an internal expanding brake however I cannot find any info that says what...
I just bought a nice cub cadet lawn bug 1027, and the front wheels were replaced with some garbage ones. if anyone has a 4" wheel or 5" wheel that has a 5/8 shaft doesn't need a bearing, I think the originals were just greased. let me know thanks!
so i got this vintage go kart a while back as pretty much a junker. was talking to a buddy who reminded me that the rear wheels probably had vintage value, i just picked up a Heathkit Hilltopper and posted it on here and thought hell, these one wheel drive go kart wheels also make perfect mini...
I thought i had read somewhere about some sort of solution thats good for soaking stuff like cast aluminum parts which help pull stains out?? anyone ever do anything like that? I want to say it was some household product that would possibly do it.
I have some wheels that I would like to...
I was watching these for a while now thinking maybe they'd fly under the radar & I'd get them cheep. Hopefully went to someone here.
Mickey Bike wheels?
So I'm planning to build a minibike soon, I have a 196cc Tecumseh powersport engine with a clutch and chain, and a bunch of steel pipe for the frame. I'm also using the posts from some suspension bike forks for the shocks. My question is about the wheels, where do I get them? Everywhere online...
I am In the area of Clinton twp Michigan and I was wondering if anyone knows where I can get a set of ruttman wheels with the four spokes or whatever. I don't want to drive too far. Thanks i need them ASAP
Frame was rewelded a lot at the neck. So it is probably junk. But the wheels caught my eye. Is it a Fantic like it says on the fork knob? What model? Is it the original kickstand and pegs? I dont think the frame is worth playing with but like I said the wheels looked interesting. Tall and thin.
I bought the HF blasting cabinet, & the XL baking soda, but the soda seems to be shy of the job, just like I am.
I have some recently bought Lil Indian 4" wheels that need a GOOD cleaning. I know the blaster won't remove the multitude of scratches, etc., but the soda barely makes a dent...
I had my Bonanza aluminium wheels sand blasted. I initially removed the old paint and started to try and polish but there was so much old paint on the backsides I gave up. The guy at the speed shop said the quality of the aluminum is not good enough to get a good polish finish and suggested I...
So I put ATV tires on my son's Yerf-dog and the front still sits much lower than the rear and I'm afraid it will high center way too easily. I'd like to put 7 or 8" wheels and tires on the front instead of the stock 6's but much higher and wider will rub on the frame in a tight turn. Will these...
:glare: Before I forget.. I went to Tradin Daves to trade my boonie and found an EARLY LIL Indian, like TINY Indian, then another bike with 4 inch Lil Indian mags on it :drool: and then theres the ole "Git Er Done" bike. :mellow: It's an old Gilson with split aluminum wheels.. I never noticed...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.