S surfrodder29 New Member Oct 1, 2010 #1 Oct 1, 2010 #1 How would i find one of these or can i make one? or should i just make a bushing.
steveweippert69 New Member Oct 1, 2010 #3 Oct 1, 2010 #3 ats what i was thinking lol and youu could adjust the spring press too. kinda a tuneable susp
S surfrodder29 New Member Oct 1, 2010 #4 Oct 1, 2010 #4 I don't have the spring that came on the bike and im not really following you. new to this stuff:shrug:
I don't have the spring that came on the bike and im not really following you. new to this stuff:shrug:
B Bill Ellerby New Member Oct 1, 2010 #5 Oct 1, 2010 #5 Take a valve spring from a car engine and cut to fit, make sure to use a very thin washer top and bottom.
Take a valve spring from a car engine and cut to fit, make sure to use a very thin washer top and bottom.
S supernova Banned Oct 1, 2010 #8 Oct 1, 2010 #8 surfrodder29 said: should i put a spring on the top too? Click to expand... No only on the bottom.:thumbsup:
surfrodder29 said: should i put a spring on the top too? Click to expand... No only on the bottom.:thumbsup:
Yellowhand Oct 1, 2010 #9 Oct 1, 2010 #9 How long is the spring you need? I ordered new steering springs from Century Spring to fit my Sensation MB-6's, and I have an extra one...
How long is the spring you need? I ordered new steering springs from Century Spring to fit my Sensation MB-6's, and I have an extra one...
blkscorpion80 Active Member Oct 1, 2010 #10 Oct 1, 2010 #10 Yellowhand said: How long is the spring you need? I ordered new steering springs from Century Spring to fit my Sensation MB-6's, and I have an extra one... Click to expand... Here is a picture of mine. I can measure it when I get home if that'll help out.
Yellowhand said: How long is the spring you need? I ordered new steering springs from Century Spring to fit my Sensation MB-6's, and I have an extra one... Click to expand... Here is a picture of mine. I can measure it when I get home if that'll help out.
S surfrodder29 New Member Oct 1, 2010 #11 Oct 1, 2010 #11 i think im gonna try to make one out of a valve spring. i don't see what will hold my top bushing in when the spring is compressed.
i think im gonna try to make one out of a valve spring. i don't see what will hold my top bushing in when the spring is compressed.
derekbmn Oct 10, 2010 #12 Oct 10, 2010 #12 surfrodder29 said: i think im gonna try to make one out of a valve spring. i don't see what will hold my top bushing in when the spring is compressed. Click to expand... The bushing should NOT be that loose. Why everything is apart, it would be wise to replace the upper and lower bushings if there is slop in them.
surfrodder29 said: i think im gonna try to make one out of a valve spring. i don't see what will hold my top bushing in when the spring is compressed. Click to expand... The bushing should NOT be that loose. Why everything is apart, it would be wise to replace the upper and lower bushings if there is slop in them.
