where can i find a 1/8" peacock and 1/8" vent plug ?

[iatemeself]

where can i find a 1/8" pitcock and 1/8" breather vent ?

I've ordered a gas tank that needs both a 1/8" threaded peacock and a 1/8" threaded vent plug and have been looking online everywhere and can't find any. Maybe I'm looking at the wrong places, but even local stores around me don't have any and they said these are special made parts they only have 1/4" threads... Need some help been trying to find them for a few days... :hammer:

any help is appreciated if your going to hate just don't post at all thanks

 

[Rapidrob]

Brass Petcock w/ Fuel Filter 1/8" Ribbed Outlet
class act
http://www.kingsmotorbikes.com/bike-motor-part-gasoline-tank-switch-cu.html
This may be metric,call them

 

[iatemeself]

Thanks a lot! Any idea on the vent plug? I wanted to get them from the same vendor for shipping purposes.. pain in the ass to find

 

[Rapidrob]

when you say "vent plug" do you mean a pipe plug or a vented pipe plug? Any photo's

 

[iatemeself]

I think a vented pipe plug, the gas tank I bought doesn't have a vent on the cap and needs ventilation through the 1/8" threaded hole. A plug that doesn't let gas out, but lets ventilation in and out?

?

 

[Andrewp]

Maybe this one will work, or they have another kind.Breather Vent Fitting 1/8" NPT -

 

[iatemeself]

hmmm yeah i might plug the 2nd hole and put the vent on the cap than

 

[Bill Ellerby]

OldMiniBikes sells the 1/8" fuel petcock.

 

[derekbmn]

:shrug:

 

[banjo]

:shrug:

:lol:

 

[iatemeself]

lmao meant pitcock but cant edit titles :laugh:

 

[texasfabguy]

lmao meant pitcock but cant edit titles :laugh:

Lol....you did it again.

 

[iatemeself]

Lol....you did it again.

Touché

 

[70sVintageTrikes]

Peacock..Pitcock..Petcock?:laugh:

 

[iatemeself]

lmao im just going to put a 1/8" npt with 1/4" barb and some gas line and flip an air filter around, sounds like a better idea

 

[texasfabguy]

lmao im just going to put a 1/8" npt with 1/4" barb and some gas line and flip an air filter around, sounds like a better idea

And easier to spell too :thumbsup:

 

[iatemeself]

thats always a bonus petcock, pitcock, peacock, haha :doah:

 

[texasfabguy]

You going to vent the cap or the tank with the fitting?

 

[iatemeself]

Someone on 4cycle gave me a sweet tip,

"just get a 1/8 npt with 1/4 in hose barb fitting and then put a piece of fuel line on it and a fuel filter for your vent. you mount the filter so the fuel line is on the outbound side and the inbound is open thats the way we have done the vents on our fuel cells on our stock cars for year"

I think that's what I'm going to do. Cheaper, easier and quicker. :thumbsup: