This is listed as an all original 1971 ARCO easy rider, but it has a later model Tecumseh. It does appear to be an actual minibike engine so I'm hoping he just has the year wrong. All original 75 or 76 ARCO ? (Other than the chinese carburetor.) I haven't seen it in person.
All original barn find. Original mag wheels,original chain guard, 76 briggs engine. Very complete. Located outside of detroit michigan. 600 or best offer.
My brother just dropped off a '76 Champ that needs a bit of work. Where should I post about finding parts for this? It needs both sprockets, chain, and chain adjusters.
Very Clean 1976 Briggs & Stratton 2HP Engine
White engine - Model 60102-0303-01 76111501 Built November 15th 1976
Complete engine with Carb,Gas tank and exhaust
Can send additional pics per request
$50 Plus Shipping or Local Pickup
Good compression & Spark
Very Clean 1976 Briggs & Stratton 2HP Engine
White engine - Model 60102-0303-01 76111501 Built November 15th 1976
Complete engine with Carb,Gas tank and exhaust
Great Compression & Spark
Can send additional pics per request
$75 Plus Shipping or Local Pickup
Very Clean 1976 Briggs & Stratton 2HP Engine
White engine - Model 60102-0303-01 76111501 Built November 15th 1976
Complete engine with Carb,Gastank and exhaust
Cant get pics to load but can email them to you
$100 Plus Shipping
Also Have a Nice Vintage Briggs 3HP available $100 Plus Shipping
Very Clean 1976 Briggs & Stratton 2HP Engine
White engine - Model 60102-0303-01 76111501 Built November 15th 1976
Complete engine with Carb,Gastank and exhaust
Cant get pics to load but can email them to you
$100 Plus Shipping
Also Have a Nice Vintage Briggs 3HP available $100 Plus Shipping
Been working on this K5 for 2yrs. Should be ready this summer for my son. Nose has been replaced along with both doors. And alot of welding on the rear quarters. Floors were really good. Only a few small spots required work. Had no interior so after answering many craigslist ads it is complete...
Hi everybody, I haven't been on for a while because I haven't been working on any bikes lately but I have been working on this.
I picked up this 1976 Skiroule Sonar 300T for $50 in August. I brought it home in October and have been working on it weekends when I am home.
Sent from my...
I have a 1976 Heald Super Bronc VT-8 complete without a carbuerator. I have been looking for a carb that would work on this bike but to no avail. Can anyone help?
The engine is a HM80-155057C Serial# 60370
I understand the carbuerator had a diaphragm pump. Where can you get these?
Nooooo not that Fox Chopper sorry. :laugh: This is a 1976 Garton-Fox bicycle out of Milwakee, Wisconsin sold at JC Penneys and other department stores. Fox was a huge player in the early years of motocross mainly made shocks for the Pros MX bikes.
I've been looking for the right deal on a Trail 70 for years. I finally picked one up last weekend. It needs some work, but I think it will make a great bike.
I had a 1972 Trail Jet, which I rode around the neighborhood all the time. My buddy next door bought it from me the day I brought...
Edit: I should add, I hope you all like being overloaded with pictures, hahaha!
So here's the backstory if you want to read it, and it's a pretty good one.
Long version:
I'm a volunteer firefighter and I was working one night at the station. My Captain stopped by just to say hi and see...
Hi Everyone,
I am currently in the middle of a restore on my 1976 Yamaha Chappy LB80. I'm having a problem with my electric wiring and some how a few things were crossed. Does anyone have a diagram they could share or ONE SIMILAR from another year Chappy.
Thank you,
-Mike
Ok I'm getting a 1976 dt400 tomorrow and I have a question I'm only 5'6" and 135lbs would this bike be too large for me or could I touch the ground with my feet?
Here is another bike I got..:laugh:
1976 Yamaha Champ LB80 2 Stroke
Odometer reads a whopping "1,279 Miles"
I need a headlight and front fender if anyone knows where to get either one??
Does any one here own one. I have the chance to pick up a fairly nice DT400 and was wanting some opinions on reliability, maintenance and some pros and cons.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.