3.5hp

I found one but "brigg air filter adapter fun power" Seem fix but I don't know what the measure? :shrug: Any idea? Thank

I got this engine with another bike but have no use for it. The guy that sold it to me said it runs and it has compression and spark and the carb looks clean, so I have reason to doubt him. The shaft is shorter than the clutch, by about 1/2" so it can only be mounted gear out. Clutch works...

i have a 3.5hp tec engine it will not start all it does is turn and doesnt seem like it has alot of compression rings are like brand new im stumped?

well i haven't done any thing beside change out my rear wheel on my bike .......so i have been helping my bro with this monstrosity budget build :gunsmilie: its a go kart that was a gokart that wasnt goin to be completed so we cut the front axel off welded the ends together and put a neck and...

Picked up some Motors last night , If your LOCAL (Manitoba Canada) Maybe we can make a deal.. ? Truck Load Of New Toys!! (Antique Engines, RC Tanks ,8HP Generator & Cool Shit!) - YouTube

I picked up the ol' Manco 593 minibike I believe for $50. Needed the throttle set up, which took a little time. Went through the basic motor maintenance before I started ripping it. Two weeks on the trails and I blew a hole through the case. What are my motor replacement options. I just put $600...

Hey guys, new here and I have searched the threads but didn't find an answer for my problem. Have an edger that runs perfect, but the crankshaft is only 1.5". If I put the clutch on with the gear inward I can line it up with the wheel sprocket, but then the keyway doesn't extend far enough to...

try it over here instead of relisting. It an '08 475 series, I set it up as a remote tank "custom" to fit into a Taco Frijole frame. This is the last new 3.5hp motor I had and the last of any Briggs parts I have. Motor is BRAND NEW and never run, no oil or fuel has ever been put into it...

Up for sale is a new old stock Tecumseh connecting rod part no 30963 / 30963B. Applications for this part are numerous including certain H30,vertical models and many other models too numerous to list. Please refer to the online fische of one of the small parts suppliers for verification of...

I have this new in the box 3.5hp briggs . Never had gas or oil in it 5/8 shaft 2 5/8 " $145 plus actual shipping Prefer postal Money Order

View image in gallery I want to trade this 5HP Briggs for a Briggs 3.5HP engine, post pics of what you have.Thanks Rocco...

hey guys been trying to get this engine started for the past few weeks with some few hours to spare on it. model #82232 type#0386-01 when i bought it the guy told me there was no spark took his word so i went ahead and bought a new magneto put it in and that didnt do any difference,had spark...

If you can fit a 3-3.5hp flywheel on a 5hp can you do the reverse? Question is can I put a billet 3hp size flyweel intended for the 5hp on a 3hp?

I welcome all comments, If im over priced then tell me, its the only way to learn. But lets do it in a professional manner. These are some engines I have laying around that I dont need. I have not tried to start them but they do pull freely. Free local pick up is available on these or pay...

My friends mini bike which I occasionally ride has a very sloppy sounding engine. It still has great compression and starts up first pull every time but it sounds as if the piston is flopping around inside the bore. It has been this way since we first got the bike and apparently refuses to die...

lil indian flat track style I got my first minibike 23 years ago when i was 7 years old. Growing up with a family full of mechanics and two older brothers our garage was full of minibike parts so none of our bikes were original. I never knew the make of the bike but i just recently found out it...

i have a newer 3.5 hp tecumseh no spark, the magneto is good, but its creating no spark, the intake valve was stuck but i got it unstuck and works good now but no sparka and wont turn over, could it be the valve or flywheel?? help

I am putting a K&N air filter and a custom header on my Honda GX110 (3.5hp) motor. I was wondering what would be the proper size to drill the pilot jet and the main jet out to? it has a Keihin carb on it. The help is greatly appreciated. The reason for the performance air filter is because...

here's another one... was going to tackle this project for a friend just to see if I could do it. But I'll never get around to finishing it and I know there's quite a few of you on here with these engines so I figured what the hell. as for background info.. My stepdad found it on a mineshaft...

do they exist? I've been searching for quite awhile now and I can't find anything. well actually.. I've found a couple gasket sets that may or may not work on the horizontal because they are made for the vertical version.. :shrug: what I'm looking for is a .010 overhaul kit, gaskets, piston...