adapter

I'm looking for a aluminum air filter adapter (aftermarket) for a Briggs 5hp flathead. New or used as long as its in good condition.

Is there an adapter plate for a Briggs Raptor that will allow me to adjust it easily (similar to the one for the clone)?

Need adapter that gives you threads for mufflers on HS50. Would take 2 if u had them. I think the part is 730165 but hard to tell from drawing if there are threads. Cant see what else that part would be for...

Box of Parts Briggs exhaust - Briggs control panel - brake cable - briggs 3.5 head (damaged threads) - Bennelli horn & light switch - Harley pegs - hockey puck 3/4 bore - Tappered Generator shaft adapter - briggs exhaust deflector - briggs gaskets $ 75 + $10 shipping. no parting out - buy it...

briggs filter adapter for flowjet $15 shipped :thumbsup:

They do have the generator shaft - but you can get an adapter or file the shaft down a little - and get a $20 carb and a piece of rope and its running. I did 3 of them so far. Engine Tecumseh New Parts Engine 5 5HP Short Block Read Description | eBay

Hi . I just got my new predator 212 motor from HF and adapter plate went to install motor on newer style doodle. And the engine wont fit took adapter plate off and the engine hits the bar in front of back tire. Has anyone else have this issue? if so, got some pictures you could share.

I need a steel 6" rim ,sprocket an brake adapter for band brake thanks my other post got moved somehow.

Need a Motor adapter plate to put in a briggs 3.5hp in a Motovox mbx10 . anyone have 1 ??

I am looking for a Long intake adapter, one that is cheaper than the one on the website. They are $40 on the site. Im looking to pay at least $25-30 shipped. If you in michigan/detroit area that will be a plus! Thanks, Look forward to hearing something from someone.

Im trying to locate the same brake cable hardware as this on the lil indian that connects the cable to the frame so you can adjust the cable . Some sort of ball adapter of some kind. Thank Mark

Got the adapter plate from OldMiniBikes and it did not come with instructions ?? Where do i need to drill the 4 holes ? Also went with a hillard clutch do i need spacers to align it correctly ? Theres about a 1/16 gap between the bolt and clutch .. 212 predator on a doodlebug

Made an intake and adapter for a buddy, I'm also making my own but mines going to be a one piece Intake.

Will a GX160/clone air filter adapter fit a GX120? And if it does, then will a GX160 carb work..... ?

I found one but "brigg air filter adapter fun power" Seem fix but I don't know what the measure? :shrug: Any idea? Thank

I have a new real mikuni tm28 flatslide that I bought for my briggs animal engine and I have changed my mind and therefore it is now for sale. I'll include a billet flange (too big for the stock animal head) and shipping, all for $100.

Hi there, I am planning to use the GTC 1003 1'' bore torque converter (like GTC TC2 1003 Gokart Torque Converter 30 Series) on my development mini bike (http://www.oldminibikes.com/forum/project-logs/79404-patagonic-trail-cruiser-2.html) The engine would be a Honda Clone 200cc 4T, which as...

Hello, new here and I go by bikebudy aka' Cory I've had a few minibikes in the past, even built a custom one from an old mini frame. Right now I'm working on two things. The three wheeled custom Schwinn chopper, I'm putting a Honda gs160 into! ( my avatar ) AND, A Rupp Go-Joe 4...

I was tightening one of the bottom bolts on my pmr adapter plate and the bolt snapped because I tend to over tighten things now I have to see if I can new bolts from promod I was wondering is there a ft/lb torque that people torque the bolts to? Or do you just not over torque? Any info thank you

Curious if anyone has made one.looking for tips and ideas.thanx