ball

Well, I'm getting ready for the big event here in Allentown, PA next weekend. The 2017 PINFEST pinball show at the Allentown Fairgrounds. Show schedule for this event will be: Thursday May 4th (setup only for vendors and free play) 1:00pm to 9:00pm Friday May 5th from 12:00 pm to...

Who knows a place that does ball burnishing. I had a couple sets of manco rims I need done up

I picked up this original paint Trail Horse (I assume it's a 100) today. I have a 100 and when I got it I had done some research on it. I don't think I have ever seen one with the rear kickstand and a rear band brake. I thought all had the clutch brake and either no kickstand or a kickstand that...

Got my wheels back. They cleaned up nice. They had to redo the Go Powers with a different media because they are Magnesium and we're turning a funny color. Looking good for being 50 years old.

Has anyone had aluminum wheels ball burnished? What were the results? I want to get the original look on my old taco wheels. Thanks TLJ

Looking for a pair of nos cherry 7/8" right and left brake lever with the cable adjuster and ball end. Also interested if you have just a left or a right one. Thank you.

I am having a problems figureing out even a part nuber for this thing! I need a 3/4" output crankshaft, the engine number is a 130232 1541 01 (1987) It is ball bearing supported on the PTO side only, uses the old style one way ratchet starter (long snout crank). Need a usable one as mine is...

Putting a new main crank bearing (ball) in my rebuild project. I see in the Tec manual a mention of a retaining bolt on the inside of the case cover. When I tore it apart, I noticed there was none installed. I see two holes that look like they could be used for this. Do some people NOT put these...

9 times out of ten i dont bother with taking off and changing the welch plugs. Yeah i know its not the right thing to do but so far a perfect record with rebuilding these sons of bitches. Last night im feeling extra industrious and take off the one behind the diaphragm and as im pulling it off...

Ok, so I couldn't resist diving into the Cat 400 that I found on CL for $40. Today was spent undoing the scrub brake, losing the 3hp engine, and tackling the handlebars. The front lowers are bent and the left tube is broken away, so I found a set on ebay for $35 and they arrived today. The...

Any issue with reusing with piston? Are the scratches on the skirt worth worrying about? I already ran a scotch brite over them. I had just planned on ball honing the cylinder and re-ringing it.

I was wondering how much Horse power this engine would have...I understand you won't know unless you Dyno test it, but whats a ball park Hemi predator 22 mikuni, black mamba 26lb springs, arc,flywheel , rod ,

Im trying to locate the same brake cable hardware as this on the lil indian that connects the cable to the frame so you can adjust the cable . Some sort of ball adapter of some kind. Thank Mark

Looking for the crank seal OEM part # for a ball bearing sidecover on a HS50 motor. Ole

Hs40 ball bearing side cover. No cracks or issues that I can see. $30 plus shipping.

Seems quite a few people are looking for 6" GoPower wheels these days. Here is a set that I can offer for sale. They have been media blasted, ball burnished and clear chromated for future corrosion protection. $150 + shipping. Keep in mind that's about $100 for the wheels and $50 for the...

I bought a 5hp I/C Gold for 15 bucks a while back, i did a little mods to it since. But just for shits and giggles, i want to put a ball bearing on the PTO side, because im pretty sure the flywheel side at least has a DU bushing or small ball bearing. Im wondering if all i need to do is buy a...

Well doing some cleansing of my shop. I have a couple of frames to get rid of 1. doodlebug rolling frame(keeping the engine and clutch) $90 2. Alexander Reynolds rolling frame with new seat and street tires- $100 obo 3. homemade lowrider frame with crazy scrub brake set-up- $30 I...

Where can I get an oil seal for an HS50 with a ball bearing side cover? Engine # is: HS50-67124D. Most of the illustrated parts lists I have found don't show it.

new never used 2 3/4" ball hone, 320 grit....$35 shipped...