billet

I modded a predator 212 to put on my mini bike to drag race it 1/8 mile. Mods include fuel pump, billet flywheel, billet connecting rod, mod 2 cheater cam, 18lb springs, high flow carb, air filter, aftermarket header and RLV muffler. The engine is running on 100 octane racing fuel. I am running...

Looking for a billet rod for a hsk60.

Hey all, I am restoring a 1974 5hp engine. The engine has not had very much use in its life, as there are faint remains of hone lines on the bore :laugh: I am doing this motor in its original white colours. I also plan to be using the stock flywheel. Which brings me to my point. I was...

Finished up this little beast. Started life as an Arco. Lots of fabrication on this one. Wheelie bar is adjustable 4130. Tank is freshly fabricated as well as the exhaust. Cheeftah wheels got spiffed up. A good friend made the seat. Predator 212, billet rod +.020, billet flywheel, mod 2...

Hi all!! The 212cc stock predator in my MB200 is still running strong! No signs that it will let me down any time soon and I haven't been easy on the bike either. I still have the OEM 6.5hp clone that came with the bike lying around.... Before I order the parts and do the install, I just...

i was puttering the afternoon away with an H35 block and an ARC6282 billet connecting rod, the billet rod fits the H35. Slick! it will need some fitting so it passes the cam, the oil dipper will need a hair cut too. this rod is the one for the 5.5hp tecumseh OHV, it also fits the HS50...

I got a 6 HP Mitsubishi motor that is the same as the 6 HP Briggs vanguard . It came with my Firehawk mini bike. I would like to make it faster and have been searching for racing parts online. I have found a billet rod for it but have not seen any hp cams or billet flywheels that can fit this...

im starting my little string of winter modification and was curious on my current cam selection. Heres what i have. Hemi Predator- billet flywheel billet rod Robertson loop header, and straight under seat header arc .625 carb and intake 4* advance key 26lb valve springs Im about to...

Drag racing manual clutch, not a centfical but a true cable clutch I haven't seen these before but I am interested in putting one on my drag bike. It is a nitro 44 frame. 12 inch rear wheel base. Modded predator 212 with a .625 bored carb, mod 2 cheater cam, 18lb valve springs, billet fly...

I built a drag bike from a nitro 44 frame. The motor is a predator 212 that I rebuilt. - DJ-114X ARC top plate/throttle hookup - 6934 ARC billet air filter adaptor - DJ-1257 Choke hold - Fuel Pump - 6877 Pulse inlet fitting - 6899 Angled air filter - 5' fuel hose - DJ-1420 Chain...

I built a drag bike from a nitro 44 frame. The motor is a predator 212 that I rebuilt. - DJ-114X ARC top plate/throttle hookup - 6934 ARC billet air filter adaptor - DJ-1257 Choke hold - Fuel Pump - 6877 Pulse inlet fitting - 6899 Angled air filter - 5' fuel hose - DJ-1420 Chain...

I need a billet rod for my 160. Hopefully for a pretty cheap price. Rod can be used. But not all scratched up and mangled. Thanks.

I'm looking for a billet flywheel for my 420cc predator that has both electric and recoil start, like the stock flywheel. So far all I've found are one or the other. Adjustable timing is not a concern for me.

Looking for $900 or best offer shipped NO CLUTCH -predator 212 block and crank (gov and low oil removed and sealed) -arc billet rod -wiseco flat top piston -arc light billet flywheel no fins but have plastic fan if needed -mikuni 28mm slide carb methanol and manifold (ran gas before needs...

going through ebay the other day I stumbled on an NOS Tec rod that appears to be billet, nothing but a part number on it and no description so I start searching the number. Best I can tell its for a Star engine based of the 10hp :shrug: part number 36972k I bought one of them...

A member made these a few years back. They are 7HP Tec billet rods. This unused...not passed around to oogle. I paid 150 plus shipping....you can have it for the same. It is 1 of like 35 made. I went with the original motor on my Harrison...so it just sat in my tool box. Any questions or...

Anyone have a Billet flywheel they've used and is getting rid of?? Im in need of one.

I am in the process on building a nasty alky briggs and looking for a big billet cam for the project. let me know what you have. Thanks

So a hemi predator needs the Honda billet side cover, correct?

I have a new Predator OEM! stock flywheel I would like to trade for an ARC racing billet flywheel. As a bonus I will throw in a new plastic fan that bolts right up to the OEM stock flywheel. If you don't have anything to trade, please do not respond to this thread. You pay shipping to me, and I...