b&s

So last fall I bought a go kart from a guy. I got it for dirt cheap because the motor didn't have the recoil housing and he couldn't start it. I didn't care because I already had another motor to put on it anyway. Fast forward 7 months: I dragged the Briggs motor out on Easter weekend and...

Hey guys, going to broaden my knowledge and thought I would take a shot at trying to get this Briggs3HP engine running for a later project. I tore it down last night as far as I could get it but wanting to replace the carb that is shown in the photo. A previous owner welded some linkages and...

Hi All I got this new mini and it came with a new 305cc B&S. He bought it and started it for less than 15 seconds.He just wanted to make sure it was good then put it on the mini and never finished it. It has electric start on it. It has no muffler and no gas tank. I looked on ebay and the best...

I have a new diafram. head gasket. And a carb to gas tank gasket. I've never worked on a motor with the carb mounted on the gas tank so sorry if this is a dumb quiastion. But from what I understand the longer tube picks up the gas and drops it in the bowl For the short one to pick up:shrug...

Looking for a complete air filter assembly for a B&S 2hp engine. PM me with pictures, and price. Thanks.

Hi there... I am currently building my first minibike and all is going well...I had a somewhat related question I thought you might be able to help me with. I have an OLD 3HP B&S portable water pump. I want to connect my old 97cc Baja engine to the water pump to help water my garden. The...

Can someone point me to a Operator's manual for Briggs & Stratton model 80212 engine? This engine is from 1980 and is a 3 HP model. It's model 80212, type 9952 01 and the code says it was made in Apr 10th, 1980 in plant 01 The throttle has a strange control rod that's threaded and you turn an...

I have three tanks for sale....two are the Clinton 2-cycle type...One still retains a few of the original decals (mostly clean with a little surface rust inside (25.00) and the other is a silver tank (small dent) same size (3 1/2" diameter and 6 7/8" long, and clean inside (20.00) both include...

I have a few (5) B&S engine shrouds for sale, I also have one Clinton....here are the descriptions....(1) 1958 2 hp shroud and recoil, model 68-HS, SN 58035, has the embossed B&S....(2) 1971 3hp Shroud and recoil (small part of lip removed (see photo), Model 80202, code 7110053....(3) 1981 5hp...

Hi all, I recently finished a mini bike project, and over the past few days i've been ripping my mini all over the neighborhood. Lately 5hp briggs has been bogging right above idle. and i also i noticed on a ride that there was spark jumping off the spark plug and onto the head...

I got an engine on a Tote Gote. Originally supplied with a 6HP B&S, the engine it came with has an obliterated shroud, so I can't read the Model number. I measured the bore and it's 2.99 and stroke is 2.39 which leads me to believe it's a 170000 series, 7 HP engine. (On line data) Is...

I found one but "brigg air filter adapter fun power" Seem fix but I don't know what the measure? :shrug: Any idea? Thank

2.50HP & 3.0B&S for sale. 2.50HP engine currently has tecumseh carb & intake on it. Runs GREAT. (I will include the original suction carb + tank & breather minus filter... filter disintegrated). $40. 3.0HP is 100% stock. Comes with hot-dog filter. Broken rewind spring. Runs, but needs a...

I need help with getting the correct recoil pull starter for this motor. Also any other parts needed to go with recoil. Thanks

Just picked up my first mini bike in more that 30 years and looking to see how I can get more out of the 6.5hp Cool little bike but I know there has to be a way to make it better!! Thanks

i have 2 engines for sale: 2 HP Briggs and stratton needs a plug and fresh gas 60 shipped 5 HP GC160 Honda runs mint and looks nice! 120 shipped the g400 sold

Been awhile since I've been active here as I sold the old Rupps I had and now have a few motorcycles, but I've held on to this one. Haven't really gotten anywhere on it, so time to see if anyone is interested. It is a 1959 McClean Big Wheel tractor, one of about 500 made in Indiana. The company...

OK, how's the smoothness and vibration of the two compare, hemi vs flathead, hemi is quieter? right, and has big muffler:shrug: Can they be compared???

hi i need to know which way the polarity is if anybody knows facing the flywheel as it spins clockwise is it north-south or south-north? got a lil idea up my sleeve ;) cheers

looking to buy all the linkage and springs that connect the carb to the tank and governor. thanks this is for the briggs and stratton 130202 1325-01 on my 69 boonie bike, also looking for the ski. thanks