carburetor

Many years ago I purchased a carburetor cleaning system from Napa. Was a gallon bucket with a steel basket to soak carb parts in for rebuilding. The stuff had a distinct smell common to auto garages and machine shops when I was a kid, we'll say 40 years ago, it was a common thing. I have come to...

This is a great working gas carburetor off of a briggs raptor 5hp kart engine. I measured the bore and it looked to be .710. It is set up with all the linkages for a go kart, minibike, barstool etc. It has a nice aluminum air filter adapter. The tank is in great condition with no dents and is...

my brother passed and i have his stuff. i have a KEIHIN PE CARBURETOR old model it has to be 10 years old bot it was in the housr. how do i measure it to tell what size it is? is this useful or crap? it looks new but dusty and clean.i will put it on shelf for another decade then it will be...

I tried out this new carburetor cleaner on my Toro snow blower I got in the fall for next to nothing. I now it been mention on here before,But I finally found some at our Autzone store. It worked out good, I soak the carburetor after dissembling it, letting it soak in it for a while in the...

Just put on the carburetor kit on new DB30. IT worked great. The bike starts right up and idles smooth. There is no lag on the throttle and no more running with the choke on. The instructions were great ( color) and had a nice diagram of the carburetor for future use. I noticed the new gaskets...

how do i correctly put the linkage and springs on from the carburetor to the governor?:doah:

This is a take-off carb from a genuine Honda GX200 engine. It's a Keih Hin carb. I have shaved down and polished the throttle shaft and shutter for better flow. Also comes with choke hold and air filter adapter. Carb is jetted at .92 to work well with the open air filter and header...

Hey everyone, I'm in need of new carburetor for my Tecumseh 198cc engine. Several members (mmisterbungl, Ibanez616) replied with: Carbs off the 97cc Baja Motor and Ibea. I briefly looked up the Baja carburetor and it seems as though they have a lot of complaints. What are your thought on this...

I may need to replace the original carburetor in my Tecumseh 6 HP. Any suggestions would be of most help.

Heald Tecumseh 8hp Carburetor settings

I have a take-off carb from an HF 6.5 for sale. Installed a 92 main jet and a GX140 emulsion tube. Air filter adapter/choke lever holder will be included. I will also include the stock emulsion tube and jet. I did some minor work on the throttle shaft and shutter. I figured I'd try that out...

I got mine today in the mail. I took a few picture of it, So everyone can see for themselves what it is. Its a Rotary brand carburetor. Made in China. It looks to be a copy of the ones for the 3.5Hp Tecumseh engines. Fuel bowl is aluminum. The inner part is slightly smaller than the one on a...

Brand new, never used complete Dellorto UA 19 S. $275 shipped.

FS is this NEW gas Tilloston set up for mild to wild modified clone running gasoline. The carburetor is all set and ready to bolt on. This one has a couple of very minor dings in the velocity stack, and a few ultra fine scratches here and there. Otherwise the carb is perfect and very...

Here is a nice new Tillotson set up for gas for a stock to modified clone motor. This carb has received a little TLC by me as you can see in the photos. The carburetor is ready to go with the velocity stack attached. You will need a manifold which I will have later this week or you can get...

I got this carburetor a while ago and had to get some parts for the throttle linkage. Although it's small, it's quite an extreme carburetor. 1.100" Throttle Bore & 1.020" Venturi & Requires Fuel Pump Snapped some photos of the Test Fit/Mock-up. Only problems were the throttle plate...

Just in case anybody has one laying around. any rebuildable condition fine.

I need a carburetor and throttle linkage for a Tecumseh HS40

i need a carburetor for my 4hp briggs. just the carb. its the old style. thanks.

Guy's would this fit on my Rupp Minibike? I'm pretty sure it has a 3.5 hp Techumseh. It looks almost like the one on there now... 50-640 Carburetor equal/ Tecumseh 640084B - eBay (item 180553255164 end time Sep-25-10 12:22:19 PDT)