clutch?

Hello all, I am having trouble recently with my Coleman BT200x. It stalls as soon as i let go of the throttle, especially riding down a hill. Seems less powerful than before. I thought it was a clutch issue, and cleaned and oil the clutch. (the right way) No luck... Any suggestions? Thanks in...

I am looking for a replacement bushing for a 16mm clutch. I can find 5/8 and 3/4, but not 16mm. Anyone?

As a few of you may know, I am building a mini-bike with a 5hp honda gc160 engine, and I was wondering what clutch i should get. All i need is a centrifugal clutch but wondered if there were some better than others? Thanks, Isaac

Just put a new HF Predator in a DB30S. Gas tank is a little snug at the top but workable. I bought the attached clutch and thought it would fit but if I slide it on (sprocket out) it only slides on half way. If I flip it around (sprocket in) it won't fit on at all. Did I buy the wrong clutch...

Since the Fox Street Scamp I came across is just a roller, I have no idea what clutch to use as I start to get this back together. I have found pictures of the drive system. In those pictures there are two chains from the clutch to the jack shaft. The chains are on each side of the clutch...

Do you think that putting a band brake on the clutch would work? I don't have any brakes on my bikes and well, I kinda need them! :doah: thanks!

Someone care to explain the reason this dude's price for a clutch is so high, I'm about to stop following this scumbag. I swear there Trying to screw someone. I won't put up with it.:cursing: please ruin this dudes sales. e-bay part # 201005153438 can't thread the link for some reason.

I'm sure my next project will make in excess of 60hp. I have everything figured but the clutch. Is there a clutch that will handle 60+ hp with a 3/4" shaft. I really want to keep it simple and not run a cvt.

What the best clutch for 3.5 B&S is complete stock. Maybe remove governor. i want more torque like racing. My shaft 3/4 , rear sprocket 38t and 35 chain. Any idea? Thank :smile:

I have a nos v-plex 2 speed clutch and was thinking about using it on my minibike project. Has anyone here ever tried one of these setups? Thanks in advance, Richie

I have the maxtorque six-shoe clutch with the stock shoes. I installed the black spring, and now the shoes are too light for the spring. I'd like to try some heavier shoes ( I know what some of the opinions are going to be, but I've done some research and what I've read is that heavy shoes and a...

My clutch has been apart for a while now, and I'm not 100% of how exactly it goes back together, could you guys help me out with this? I need help with the rear of it as well.

I have a manco big cat with a Honda clone 6.5 it has a comet clutch series 20. I would like to get more low end power out of it. When I bought it the guy said he had it set for hill climb and I am on flat ground. It seems to really rev before it engages which I assume is better for climbing...

I bought a lot of noram clutches and have a question. I got a 13, 14 & 17 tooth basket that have needle bearings and a hub to fit those. I also got a 12 tooth basket with a cooper bushing and another hub, but the hub doesn't extend into the bushing. The hub is keyed and is 3/4" but the basket...

hey guys, new here and pretty unfamiliar with small engines, I do have some mechanical background but not in this field. anyway I just picked up a fresh chopper, new 6.5 hp motor on it but heres my issue. it doesn't like to sit still and after running once the brakes are applied it dies out...

hey guys, new here and pretty unfamiliar with small engines, I do have some mechanical background but not in this field. anyway I just picked up a fresh chopper, new 6.5 hp motor on it but heres my issue. it doesn't like to sit still and at times it doesn't run great, sort or a pronounced...

5 hp honda with new centrical cluch

Just bought a gx390. I am planning on making it a mild build with new flywheel, carb, piston, valves, springs, and cam. What is the best clutch for the money that can handle the hp? I'm looking for something of good quality that will last.

Not sure if anyone has done this before, but it should work... I got on old style lawnmower a while back just for the engine. My plan was to sell or scrap the rest of the mower, but then I got thinking... It has a centrifugal clutch to drive the blades at the front constantly, but there is...

Hi all, bought a clutch for my son's go-kart project, got the motor going and the clutch will not engage, even at high rpm. It just kinda sits there. So, stupid question, is there something you have to do to a new clutch? De-greasing, or something? Or did I get a bad unit? It is this...