We have the 6.5 engine on it and noticed it running poorly. We have to close the choke valve almost entirely to keep it running. It is turning the back fender black from what I suppose is running too rich. Cleaned the carb no difference. What to do next?
Hi guys so a few years ago I got a db30 and the back bearings broke then I moved and the movers lost ALL the parts besides the wheel and im finally getting to fixing it and I need all the rear wbeel parts besids the actual wheel. Where would I start?
Thanks,
Lukas
Hey guys, I have been waiting for OldMiniBikes to get the db30 brake rotor back in stock but it seems like it never does, so I went on ebay and say this...
MTB Bike Bicycle Cycling Stainless 7" Disc Brake Rotors With 6 Bolts 160mm 180mm | eBay
Can anyone tell me if that would be able to substitute...
Im in Houston Texas and I am trying to get into the mini bike scene. I want a Baja DB30 like this one, it doesnt have to run or have a motor. If you have one for sale message me.
Fully stock. It kinda did this before I removed the screw with the spring on it that makes it go slower. After I removed that screw it was fine. Now it seems to be doing it again. Ideas on why it won't stay steady? What can I try?
Doodle bug db30 full throttle hesitation - YouTube
Ok guys, im looking for some advise on tires for my DB30 build. Im running the stock 145x70x6 tires with offroad tread. I would like to get a road tire that will give me better traction on blacktop and other hard pack surfaces. My plan is to parking lot race the bike with some buddies who are...
Hello, I just scored a 3-4 year old doodle bug from my neighbor, his kids only put an hour on it and then lost interest. Upon inspection when I twist the throttle wide open every thing looks good but when I release the twist grip the throttle (at the carb) stays in the WOT position. No coming...
I changed the oil for the first time in my doodlebug 30 with the 97cc stock engine. It was running fine. I also put in a new upgraded clutch and torque convertor kit. Oil level has been triple checked and there is gas. The problem is that there is so much tension on the pull start rope and...
Hello everyone new to the forum and the mini bike world... Just picked up a baja db30s with a stock baja 97cc motor. At first it wouldn't start pulled carb and cleaned it out had a little jell in the boil so I can tell it hasn't been ran in some time ..there is 2 levers one looks the the...
Repositioned gas tank to top of bike and installed new carb. I dont have the air cleaner filter or cover installed, just the black body of the filter housing. Gas is leaking out of choke port into black air filter body. Why is this happening?? Have replaced all carb and air filter seals. Is...
I am looking for a metal after market chain guard for my DB30 mini bike, the metal one that was for sale at monster scooter parts is discontinued, does anyone know where I can get one? Thanks!:scooter:
I haven't been on in a while but I just got the eruge to start working on my db30 I got a good start on the Sanding off the frame almost ready for primer I want to get some new street tires for the stock rims can anyone help me out with a company that sells a good tire for a good price ill...
Hi everyone;
I'm trying to find out the size of the bolt to keep the stock clutch on the shaft of a stock 2.8hp 97cc Doodlebug. My lad lost his in the grass when his dad didn't threadlock it in place. ;)
Is it a 5/16"-24 x 3/4" bolt plus the washer and lock washer as OldMiniBikes suggests...
I need the front fork bolt, nut and washers. Plus, need brake and throttle cables. If you have DB30 you are parting out and have parts, send a PM.
I know OldMiniBikes has these, so will get them there, if no one responds. Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.