db30

I need a chain tensioner for an older baja doodlebug complete with bolt and bushings. Sent from my SCH-I545 using Tapatalk

So I have a small problem, when i start my stock 97cc baja 2.5hp engine it stalls, and when it doesnt stall the bike throttles and goes on its own. What's wrong here? Thanks!

I recently bought an older db30 doodlebug. I believe everything is still intact on the bike but the governor arm doesn't seem to be functioning properly. I looked for a diagram or schematic online but can't seem to find one. It is a97cc 2.8hp with a 19mm carb. Any help would be appreciated...

DB30 with a little rake, stretch, and attitude. Sand blasting and primer today, will post updates.

Hello everyone, I'm super new to this bike, and I think mine is a Canadian Tire knock off, it is a Baja Dirt Bug LUAH starts the serial #, I require a recoil,air filter and cover, throttle cable, and chain. I am located in British Columbia,Canada. Any suggestions for sourcing parts? I do have...

Has anyone seen a #41 rear sprocket for the DB30? Reason I ask is that I will usually tear up a #35 chain per outing. The short jackshaft side goes first then the long side shortly after. Alignments are all great my motor is a clone with mods and just tears up chain... TIA!

I am wanting to replace the front tire on a newer style DB30, I am looking for a tallerand narrower tire. I dont mind changing the front rim, I just need something that will bolt up right. Any input will be greatly appreciated Thanks

Can anybody tell me which side of the bike (passenger or driver) that the valve stem should be on for a new style DB30? I bought one that had terrible tires on it, and when I pulled it off and swapped tires, I couldn't tell which side it went on. I assumed the brake side so that you could access...

so i found an old thread about the 6900z bearing. they suggested that it was better to get a 6900rs for the rubber seal. I'm still not sure what bearing i need after going to the mob wear house. there is a ton of bearing on there. noting is specific? what bearing or part number do i need?

I was looking for a min bike project and found a db30 for $150.00 on craigslist. so far I have stripped it down and sand blasted it. now to paint and fit my new motor. lots of work to do still. not sure what motor this is but it leaks oil like a mofo

97cc Baja Racer Mini Bike

I got this bike for my son a couple of years ago. I did a bunch of work last summer and will complete the bike this spring. I took several pics along the way so i figured I'd post the build. This is how it looked when I got it, custom bucket clutch cover and all. He was happy enough...

Hi, I want to build a mini bike and since i plan to hack it up a little i dont want to deface a vintage frame. Ill do a restoration someday but for now i want to go with more of a hacked up rat bike. The older DB30 is perfect for my vision and would require the smallest amount of modding. The...

Anyone have a new/slightly used brake rotor for a DB30? ...that they would like to sell or trade....

I know this is kinda crazy, but I need the rear lower frame hoop from a Doodle Bug. I'm talking about the part that has the rear lower fender tab on it. I know a lot of folks cut and stretch these things and I thought, maybe, somebody had cut that part off and thrown it in the scrap heap. If you...

New Hi-Run 13X5.00/6 tire, nice gun metal paint job, comes complete with original sprocket, brake rotor, axle and nut, spacers, sprocket and rotor bolts. As is, as Shown. Very good to Excellent shape. Axle lenght is about 9 3/4. USA 48 states, $100 Shipped. PayPal or U.S. Postal Money Order

I have a db,30 im messing with an was i was wondering if anyone one on here has ever switched the kickstand to the other side of the bike for different lean or look or am I crazy thanks.:shrug:

I have a stock db30 frame(length an all dimensions stock)with a modded gx160. What is the max speed that that frame can go?

Okay, before you tell me to search, I did. I searched a while. I even went to youtube, but nothing. How are you guys getting around the rear fender mount with a 212 pred? Cut it off? I tried bending the stupid thing, but I got nowhere. If there is a thread, please paste it here. If you've got...