fork

I really don't want to remove the forks because they will fall out:laugh: My question is, how do they stay in the fork tubes:shrug: I had the bike up on a milk crate and they fell out:laugh: I see there is holes in the forks but I don't see where the bolts go.:out: A little help please:thumbsup:

At least that's what I wrote on the box...don't know why I would lie to myself :biggrin: I must have had 25 Cats over the years...some I parted out. There are axles here threaded on both ends...head tube/fork bolts, spacers.and the "staked" pinch nuts. Clearing out...$17 shipped...

More spring cleaning...(no pun intended :biggrin:) Here's some NOS chrome suspension springs..two different sizes as shown. Also included are the hard to find cups spring cups that get welded to the upper and lower tubes when custom making your own. Quality NOS stuff that...

Ruttman front fork for a 6 inch wheel mini bike removed from a 1971 wild goose. Nice clean fork most of the orginal paint still on except were some minor repair have been made to tighten up the mounting bolt hole with no play. $100.00 + shipping...

Just a basic frame with no suspension. $40.00 pics soon. Thanks

I'm going to attempt to remove and clean ( possibly replace) the front fork springs on a Powell challenger I recently got. I'll also be replacing the mono-shock springs ( which I already have). Any info or instruction on this would be very helpful. Thanks!

looking for a pair of Bonanza fork legs and springs, well the caps anyways, I can get new springs from OldMiniBikes..

Was on a Cat 400x frame I recently purchased. Looking to sell or trade for Cat 400x parts. All I have is the frame, so anything Cat 400x related would be considered for trade. 400x fork, wheels, bars etc...... $100 o.b.o otherwise. Willing to ship at buyers expense. PayPal works. Located in...

I am looking for an alternative for the front fork springs on my Bonanza. The stock springs are a little light for me (I like food and beer:thumbsup:). Does anyone know of any spring alternatives that are a little stiffer?

fork nut stolen off of bicycle. 1inch fine threaded

1972 Chaparral Vintage Motorcycle 80cc Triple Tree Fork Shocks Complete | eBay 1972 Chaparral Vintage Motorcycle Mini Bike 80cc Side Muffler Guard | eBay

I have a Bonanza 1300 that has an incredibly loose fork. I replaced the bushing already. I have measured out the bolt hole in the top plate of the fork where the head bolt goes and it seems to be worn out a little bit. It measured out to .654 where the bolt measures out to .622. I have...

What is a good fork boot to use for these bikes? Don't think they came with them, but want to add them. Any ideas? The z50 ones are too big...

Looking to buy a front fork (suspension) for a BC1300... needs to be in good to great condition. Working on a project for a close friend and his are pitted on lowers and seized up where they wont come out! SMDH! rather than to hack these up, id rather use a nice pair. if you have some send...

In need of CAT fork lowers to replace the extension that where installed on my newly acquired Tr-Cat. KK measured off his about 19" long from the top threaded area of the forks to the lower eyelets that mount to the axle... They dont need to be nice...Just "straight" There just gonna get...

chrome

Okay, I know some of you have seen this already on my Trail "Rat" Horse. I printed it myself for my bike but the quality wasn't quite good enough. So I decided to get some actual decals made up. I had ten made up and I am using one on my bike and possibly keeping another to hang on my wall. Two...

Motovox has added the MBX11 hydraulic front fork to their website! It's not available as a full kit yet so if you're upgrading your MBX10 you will need to purchase the axle, axle nut and spacers as well. They will update their Facebook tomorrow with more information.

looking for just the bottom pieces of a set of Taco 100 fork legs....will consider entire fork setup if available.. have cash, PM with any answers... thanks

I got a little time to work on my keystone this weekend. I'm stripping it down for prep for paint. I can not figure out how to get the forks off! [/url] There is no nut or pin at the bottom that I can see. I'm sure it's easy. I'm just missing something. Also, I'm replacing wheel...