h35

WTB: Tecumseh gas tanks and brackets: H40 White plastic Red cap center with bracket. H40 Black plastic Red cap center with bracket H35 Bolt On muffler 8" Black/ original finish Thanks.

Hey guys and gals, I'm in need of a Tec. H35 engine. Does not have to be a jewel ...but mostly complete ,I can rebuild if needed. Thanks in advance ond.

Want to buy a tecumseh h35 crank shaft # 30946 for a h35 45280H if anyone has one they want to sell I'm in the market

I am looking for a crank shaft for a tecumseh h35 part no. 30946 if anyone has one they watch to part with let me know thanks for any help

Got this Craftsman H35 going last night and gonna put it into action ASAP. I have a clutch brake fetish though and wondering if anyone ever brought their motor to a machine shop to drill out the bosses around the PTO. Is that an expensive thang? Also is this here woodruff key gonna make...

Not sure whose it is, but it looks NOS. Any bets on the final value? Vintage 3 5HP Tecumseh Minibike Motor Engine Runs Lil Indian Taco Rupp | eBay

I've seen a couple of this color engine in the last couple months. Think there was 2 hs50s This is a super clean (for its age) engine. Not mini bike correct but super cool. 1968 h35 side popper. It has a 3 digit serial. Is that uncommon. As I think about it I'm not sure I've seen one before or...

Listing a couple parts I haven't used. First is a complete late model mini bike correct h35 Tec. Great compression but no spark. Has surface rust around the flywheel. Asking $75obo. Next is a Craftsman Sears mini bike parts motor, no tank but there is a worn out 2 speed clutch on it. No spark...

Picked up this one today and its got the Fairbanks Morse clutch on it. Should be able to get it going pretty quick as the compression is very sweet sounding. Its not a Rupp clutch so what bikes were using these clutches apart from them? To use it do you need a matching FM driven system?

Does anyone know if a vintage H35 blower housing (shroud) fits an early 90s model? If it does, anyone have a vintage one and willing to part with it. Going on the ARCO. Thanks!

Is there a good place to find parts to rebuild one of these? Mine runs but it really needs gone through.

I'm looking for a 1970 Tecumseh h35 recoil shroud.

I'm redoing the fuel line on my Murray track 2 mini bike and was wondering if there was any good or bad to the routing of the fuel line so close the engine. Tecumseh H35

Murray track 2 racer with Tecumseh 3.5 power sport. I was looking into replacing the fuel line and adding a cut off valve and filter and noticed how the fuel line runs right up against the engine. Will this have an effect on the fuel, it has to get hot. Has anyone rerouted the line before?

I'm doing a hop up of an HS40 at the moment and I wanted to report my findings on billet connecting rods for these engines. Nowadays, nobody sells new billet connecting rods designed for the HS40, along with its under bored and over bored siblings, the H35 and HS50. ARC racing does sell a billet...

anyone know the part number for a .10 oversized piston for an h35. going to do a full rebuild.

45621s ser2139b its on an edger and is all original. im somewhat confused by the serial number identification i guess the 2 is the year but how do you know the decade. thanks for the help in advance.

* Tecumseh H35 Head: Bead blasted, N' hot tanked. No cracks. Spark plug threads perfect. Slight chip :censure:on fin nearest spark plug hole. * Set of head bolts. * 3 NOS head Gaskets. * New NGK CS-1 Commercial spark plug * Motorsports blue, (Mallory) plug boot and...

5/8 Shaft keyed and threaded. $100 New air cleaner, and filter, and housing, Mini bike correct gas tank, (a lil beat up). Low Hours edger, Label reads 3hp, but Tec reads 3.5 hp. I believe TEC ran out of 143's and had to fill an order. Changed the oil, Unethonol gas, and VROOM Gonna...

I have a H35 (sears craftsman side popper) Tecumseh that won't start when its Hot. Whats up with that? When its cold, starts on first or second pull. Runs like a top. Pretty fast and pulls well. I guess its a snow blower engine. Not sure of the year but it looks like it has points...