head

I want to take my rtc6 head down to have it milled to increase the compression ratio. I want as much taken off as possible without having to shorten lifters or pushrods. Im hoping somebody might be able to tell me how much i should take off?

found out my rtc-6 valves wont fit in the new head. Besides the 5.5mm stem valves, is there anything else I have to order to make this work? the spring perch looks different?

Saw a couple of aluminum rear axle covers for automobiles and thought " What could I do with that",.... Well, THIS is what I did: .......Nice to know a guy that can weld aluminum.:thumbsup:

Looking for a genuine honda 14cc head

For sale 2 4.10 X 3.50 X 4 N.O.S Carlisle Double Indian Head Saw Tooth Tires.These were used on early Lil Indian's $60.00 plus shipping,or local pickup Paypal gift option :thumbsup:

Im currently building a radical predator engine. I have pretty aggressively ported RTC-8 head. I was wondering if anyone made some stainless steel valves with the 5mm valve stems. If not how can I make some fit. I was thinking of drilling out the valve stems on a drill press but i don't know if...

I recently picked up a hi comp 18cc head from OldMiniBikes, and when I went to swap mt valves they were too small for the guides. You can knock em back and forth and im pretty sure theres not supposed to be any play here?

Used but in great condition Dyno Cam 94-5 High Rev. for Briggs 5hp Flatty. :hammer: $25.00 and free shipping

up for sale tg-1 race head hondagx200/160 , clone or hemi predator . head is brand new milled 65 cc'ed at 14.8 . ported for better flow . 26#spring aluminum retainers and locks . 27/25 stainless valves genuine stamped honda rockers and guide plate $175 shipped less than i paid with out shipping...

Can I just rub my head on hi grade sandpaper to flat for more compression and also what is the max lift that I can have when I DO THIS? Thanks

I had a tecumseh engine with silver crap all over the head gasket and Im pretty sure it came like that from the factory but I cant find anything on google. I removed the head on a hsk50 and cleaned it all up and installed but I didnt torque it down hard enough.

Is it true that you can put the smaller 3 HP head on a 5 HP engine (Briggs) to gain a little extra compression? I just have a 3hp head I'd like to experiment on!

Selling a Pair of Mint NOS,never mounted Carlisle Double Indian Head Sawtooth Tires 4.10 x 3.50 X 4 .Asking $100.00 plus $20.00 shipping or local pickup welcome.Paypal using Gift option,thanks for looking:thumbsup:

$50... fits 5hp flatheads, painted wrinkle black with the fins sanded off for an old school look.

Little of the wall.... anyone know if a Webco performance head was installed on a Hodaka if it will still clear a BC style 'nanza frame. does not really look that much bigger than a stock finned head.

I'm trying to build a 5hp flat head. I want to use a remote tank. I already bought the tillotson manifold just need to know what Tec carb to use. Not really building the engine up or anything. Maybe smooth some things out.

Here is a never used Clements billet head. Like all my stuff, it is polished and shiny. $90.00 and it will arrive to you!

When I tighten my rocker arms down to .002 or even 0 cold lash the pushrods are super loose on the other end. Are my pushrods too short, or is there something else I need to do? I have a predator with a gx160 head, .016 head gasket, black mamba cam, 26 lb springs, lash caps, burris guide plate...

Started this yesterday and I'am just about finished , still want to address the valve guide in the intake port a little . One think I want to say about my porting is you'll see that the exhaust is polished , not like a mirror but enough to work fine . And when I do these ports I look at the...

oh man i really screwed up. i need an H35 head. if you have a spare head or engine contact me asap!